The Paslode 501000 Pneumatic Nailer

Feb 21
08:28

2012

Nigel Marshall

Nigel Marshall

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

The Paslode 501000 F-350S Power Master Plus Pneumatic Framing Nailer is a high powered pneumatic nail gun has been designed with the professional in mind. Carefully balanced to ensure optimum safety and use-ability for those long days, working on a job site the Paslode 501000 has been designed for the professional.

mediaimage
The Paslode 501000 F-350S Pneumatic Framing Nailer is without doubt a powerful pneumatic nailgun that's been designed with the professional in mind. Made with safety in mind and for continual use over the day,The Paslode 501000 Pneumatic Nailer Articles the paslode 501000 has been built for the professional.The Paslode 501000 F-350S Power Master Plus Pneumatic Framing Nail Gun it has been very well received in the professional market where it has received a number of accolades. It delivers a full 10%+ extra power / pound than other similar power nail guns available, it will enable you to finish those troublesome jobs much swifter and with lower recoil and great balance makes operating the Paslode 501000 for long periods is both comfortable and convenient.You can use the nailer in either of two modes - manual or sequential and the capability to deliver 12 nails per second, this Paslode, makes the big challenging projects a cinch. The extra feature - the barrel shaped nose means that operator has a clean line of sight which is crucial for making sure you get a professional finish.The framing nailer comes with a safety feature which will prevent the last three nails from firing, which could otherwise cause a jam or even other accidents.It's magazine will hold up to 84 nails in two clips of up to 3 ½ inch nails which naturally means less reloading, which saves downtime. And with the nail rule on the cartridge, it's much easier to judge the distance between nails for example, which for some tasks can be important and of course the built in rule makes it easy to produce the accuracy required.This nailer needs to be oiled regularly (daily when in use) to keep it running hassle-free, just 3 to 5 drops a day is sufficient.Van Buren froim Missouri says this about his Paslode:“When I started framing we had an older silver looking Paslode gun that felt like it weighed a ton (chuckle), and a brand new one that felt like you were using a finish nailer (it was light in comparison). Both guns shot nails extremely well. In fact, they were more dependable than the other brands that were available on the jobsite (Hitachi & Senco).Since somebody decided to liberate me from my Porter-Cable FC-350, I decided to go back to my beginnings and purchased this Paslode gun. I do not feel that my choice was flawed at all.”If you’re looking for a sturdy pneumatic framing nailer, that will manage the hardship of the construction site, then this Paslode 501000 Power Master Plus Pneumatic Framing Nailer, has the power and drive you need.