How to Fix Canon Printer Error Code ? (Toll Free-0808-178-2624)

What causes error code 5B00 on Canon printer?

When a user installs a CISS on a printer, it starts giving more output than it was made for or we can say it makes printer works much more than its ability and due to which ink cartridges produce way more pages than they were made to print. 

In addition, due to the installation of continuous ink system installation (CISS) on a printer, more and more ink spills and absorbs into the ink pad that result in error code 5B00.

Possible Rectification-

This possible solution is for multifunctional printers, for non-multifunctional printers you can contact Canon Printer Support Number UK or you can set your printer back to the original factory settings.  Restoring procedure is the best solution for all the issues that may occur on your printer.

For multifunctional printer we can resolve this error by setting the printer in service mode and make it think the ink absorber pad is empty instead of full, for this user can follow the below given steps:

Step #1:

Firstly, turn on your canon multifunction printer.

Step #2:

Now press the menu button on the printer.

Step #3:

User have to put their canon printer in service mode. To turn on service mode, a user will need to press the SCAN, COPY and SCAN buttons in that exact order. Please take into account the service mode menu is entirely in English, just as a computer’s BIOS.

Step #4:

The user needs to press + key until they reach to the COUNTER ACCESS option.  Now press the OK button

Step #5:

The user will see a page counter on their printer’s screen.  Here the user can see the number on it which indicate the number of pages they have printed in total.

Step #6:

Now press the OK key.

Step #7:

And press the COPY button.

Step #8:

Now use the - key to lower the score and set it to zero. Now, press OK.

Step #9:

Continue to use the + symbol to look around the menu and stop once you get to SCAN PAGE COUNT. Set this counter back to zero (0) in order to wipe the score on the page counter on our canon printer, found only when it’s in service mode.

Step #10:

Now go through the entire menu until you find ABS-M DONT COUNT option. Set score back to zero (0) and click OK.

Step #11:

Press stop/reset button after everything else has been down.

Step #12:

Turn your printer off and back again using the on/off button on it.

If you will find an INVALID KEY message on your computer screen at the end then disconnect the power cable from the printer and connect it once more. This how you can rectify this error, for more queries and details contact at Canon Printer Support Number UK 0808-178-2624.