Home Networking One 0n 0ne part 1
This is part one of home networking as you may already know gone forever are the days that computer users used to share data by means of floppy discs. Today, most computers no longer have a floppy disc drive because they are swiftly becoming obsolete.
Not too many years ago,
no one ever thought of having more than one computer in the home. Now that we are so dependent upon them, it is a common thing for home to have multiple computers. Before the blink of an eye, there are seven computers in the house yet there is only one printer and just one Internet connection. How is everyone going to be kept happy and productive?
The answer is to set up a network! This is none other than a group of computer components connected together with a router, hub and switch which gives its users the ability to share resources. These resources are some of the most integral parts of computer use. A network is much like a spider web. That is the basic reason why the Internet is often called the World Wide Web. Signals are constantly flowing along the network. Unlike a spider web, a computer network sends and receives those disturbances in the form of ‘packets’. Although there are other ways to perform the same function, almost all networks today operate as explained below.
On the network, the software and hardware cooperate to pass those packets.These packets are chunks of information that contain your data that is wrapped in control information. The control data allows the computers and the routers to know where and how to send your data. In most commercial and home networks, the method uses IP or Internet Protocol. Every device on the network is assigned an address such as 206.121.34.148. When you are talking about using a computer in the home these addresses are typically in the range of: 10.0.0.0 through 10.255.255.255, or 172.16.0.0 through 172.31.255.255, or 192.168.0.0 through 192.168.255.255
These are what are known as Private Addresses since they are not able to be sent unmodified over the public networks that make up the Internet. These are used by computer, routers and peripherals in your home network. These same address ranges are also used by private commercial networks. An NAT, or network address translation, and coupled with the use of a boundary router allows many companies and homes to use the same range without unintentionally passing information to and from one another over the Internet.
It may happen that your computer may have quite a different address such as 70.31.192.243. This is often true because a single computer that is connected to the Internet gets an address that is assigned by the ISP or Internet Service Provider. You then do not really have only a home network, but you are considered to be a paying customer of a commercial network. When every device, computer, router and printer, is assigned its own address, the software as well as the hardware can ascertain where the data is coming from and when it should go. This is called communication without confusion.
The router software along with the hardware, routes the data to and from the proper devices using those addresses. The method is almost exactly the same as the postal system when it routes letters from one home or business to another.
