How To Change a Car Radiator

Nov 8
14:14

2015

James Blanchard

James Blanchard

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

A car radiator keeps the engine from getting too hot. Proper radiator maintenance is vital to keeping your car running at peak performance and for steering clear of costly engine damage due to overheating.

mediaimage

Normally,How To Change a Car Radiator Articles the first warning that there is a problem with a car's cooling system is either steam coming out from under the hood or the temperature gauge rising alarmingly.

Here are easy step by step guide on how to replace an automotive radiator:

Drain the radiator. Make sure the engine is cold, then take off or release the pressure cap on the radiator. Open the drain valve. Allow the coolant to drain into a bucket or drain pan, and then close the valve.

Remove the hoses from the radiator. Loosen the nose clamps and pull the hoses off of their attachment necks. Take off the auxiliary belts by sliding them off of their pulleys to get more work room.

Install the new hose. Attach and clamp one end securely in place before you tackle the other end. Make sure that the hose won't restrict any moving parts or touch the engine when it's hot, and that the clamps are tight.

Start the engine and add more water and coolant as the level in the radiator drops.

Replace the pressure cap. If your engine is the type that needs to be bled, do so now, following the instructions in the owner's manual or service manual for your vehicle.

You know your radiator replacement is completed when no more air bubbles bleed from the system and your coolant is fully up to temperature.

Article "tagged" as:

Categories: