Get Some Information on Strain Gauge Load Cell

The load cell that is used to carry the test includes the total weight of strain gauge load cell. They are ideally meant for measuring heavy loaded things especially in the cable anchors, rock bolts, structural beams, tendons, and load between tunnel support, piles and loads in pull- out tests on the trial anchors.

The Strain Gauge Load Cell entails of a stainless steel cylinder-shaped housing with up to sixteen opposition strain gauges so that it could minimalize the sensitivity towards the unconventional loading and when the cell is laid open to load, the strain gauges then modify their resistance value. The output signal of the load cell is directly proportionate to the applied load.The cell that the load is carrying is temperature compensated and is accessible as an mV/V output or a 4 - 20mA output. In it a weighty gauge multi-core, PVC covered cable is connected directly to the load cell, which can then be connected unswervingly to a read-out unit and can be switched together with a switched terminal unit. On the other hand these gauged load cells can be strengthened direct to data loggers.All cells are mass-produced industrially with a center hole to put up rock bolts, tendons and even the anchor cables. If you want to use these cells as a solid center cell then the technical instrument can be further supplied with top and bottom load plates too. This product is mostly used by large scale industries and has been proved as the most effective means to measure out unconventional loading process in the form of rock bolts, tendons and other heavy weighted things.Know about the features of this Product Strain gauge load cell:These load cells are accurate, robust, strong and forceful and give very long term steadiness.While measuring it does not take long time and acts as a fast response giver.The negligible high temperature effects can be compared with hydraulic load cellsIt is the most accurate device that is considered suitable for measurement, out-of-the-way remote reading and data logging.Its other products such as weldable strain gauge load cell is used for measuring strain in steel adherents, the strain gauge can be linked to load bearing beams, struts, tunnel segments, tendons, and sheet pile walling . What is best in this product is that the gauge is flexible to suit compression. For more information on Tilt sensors  visit us online.