Vibrating feeder hopper is one of the most important areas of vibrating feeder. How to protect vibrating feeder hopper turn out to be much more and much more necessary for production procedure. Today we will talk about this type of question.
The vibrating feeder hopper needs to be installed on a set basis according to the required installation approach. The mobile vibrating feeder wheels really should be fixed by chuck or brake ahead of the equipment start to operate. So as not to move in the work place, if more than 1 Vibrating Screen Equipment parallel operation, there ought to be 1 meter channel among equipments. This stop the friction of vibrating feeder hopper.
Belt feeder ought to be started with no load. Feeding material after operating normally. This could protect vibrating feeder hopper efficiently.
Feeder hopper must be looked into prior to use operation parts, rubber belt hasp and load bearing. The tightness of rubber belt must be adjusted to the suitable level.
Working atmosphere and the material was delivered to a temperature not higher than 50 and less than -10 . PH shall 't be transported the fabric with oil and organic solvent composition. Stop feeding prior to parking vibrating feeder, it is possible to parking till the fabric discharged completely from vibrating feeder hopper. Feeder motor insulation must be excellent. The cables of vibrating feeder should 't be pulled and dragged. Motor must be grounded. Do not pull the belt if this slipping to stay away from accidents and shield
