Why You Need Lift Table Skirts

A Brief Overview of Lift Table Skirts
Before we go into the reasons why you would need a scissor lift table skirt, we should first go over what skirt is and what it does. A lift table skirt is used to form a barrier between the operator and the inner scissor mechanism which when exposed is very dangerous. Just like a scissor can cut off your finger, so goes a scissor in a lift that can cut off your arm or leg. These mechanisms must be covered to prevent accidental placement of hands or feet in harms way. The bellows does just that, it is a visual and physical barrier which when properly installed with eliminate any chance of an operator becoming injured.

A Not So Well Known Safety Device
While the need for lift table skirts is not always understood by companies and their associates who are responsible for worker safety. They are non the less a critical piece of safety equipment that when absent can result in serious injuries. One reason for the lack of knowledge on this safety device is could be the result of the lack of enforcement from OSHA. OSHA has the ability to place finicial penalties on companies for not being safety compliant. Such fines would bring awareness to the need for this safety device, and then as a result prevent a substantial number of injuries.

Why You Need Lift Table Skirts
There are many reasons why you would want a protective lift table bellows and they all stem from one major justification for this device. Injuries. Any worker who is injured as a result of a scissor lift which was not properly guarded results in the following.

1. Expensive lawsuits that result from negligence.
2. Costly downtime and lost production
3. Low worker moral
4. Higher awareness of your facility from OSHA resulting in other fines
5. Bad press releases about the incident to the public

You can see that there are several major ramifications that result from not properly guarding your equipment. Some are of greater consiquence than others, but they are all detrimental to the health of your organization. So make the right decision, and ensure that all of your lifters are properly guarded to keep your workers safe.