Working At Heights Training - What You Should Know

Receiving working at heights training is crucial for safety reasons when you're in the construction and mining industries and it's often a requirement of employers for liability, insurance, and safety reasons.

 

Current regulations define working from heights to include any height where a fall can cause injury. This can even be working while standing on the top of furniture or a low ladder. Some of the most common causes of accidents are: falling parts and materials, floor conditions, worker movement, hand tools and machinery. Implementing working at heights training is a way for companies to keep these types of accidents to a bare minimum.

 

Things to be aware of

 

#1. Hand Tools & Machinery. In the construction industry, as well as other related fields of work, dangerous equipment and tools are used on the job on a daily basis. Using dangerous tools while you are high up somewhere can be a lethal combination, and a recipe for disaster!

 

#2. Floor or other surface materials. Sometimes when on the job, you are required to walk in precarious conditions while at high elevations. Certain specific safety protocols must be learned and implemented.

 

#3. Worker movement. In construction, mining and transport jobs, there's a lot of movement involved and when you throw in the element of human error, things can get quite dangerous. Working at heights training involves teaching workers how to safely move around while on the job.

 

Standards

There are specific safety standards of behaviour when working inside a boom or basket and being elevated by a hydraulic or aerial lift. workers need to avoid hanging over edges and should put their feet flat on the plank.  They should avoid the use of belts, because they can cause internal damage when a fall is stopped, and belts are not an acceptable means of personal fall-arrest.

 

Every employer must implement a guardrail system when their employees are working at heights of 6 feet or above. These systems are not for sitting or climbing.

 

Workers will be able to use safety equipment such as hard hats, extension ladders and safety nets.

 

Courses

Working at heights usually courses usually have both a written and practical section. The written part is only questions but in the practical part, participants need to deal with a lot of real-life applications. The cost every working at heights training depends on the institution chosen and the number of people involved.

 

The Occupational Safety and Health Administration says that falls are the main cause of fatalities in the construction industry. OSHA has set standards for the training that employees must take when they are working at heights. Employees like technicians, utility workers and linemen are more prone to these hazards than other workers, and many might be fatal for them. Therefore they especially need the skills and knowledge that's available from this training.

a[rel~='nofollow']{outline:.14em dotted red !important;outline-offset:.2em;}a[rel~='nofollow'] > img{outline:thin dotted red !important;outline-offset:.2em;}