These days, garage is not just a place where you park your car. Instead,
a garage is used for many other purposes. There are a number of
reasons for ensuring appropriate garage flooring, including protection
from chemicals, oil spills, providing comfort for legs while working
in the garage and also providing a well-maintained appearance to the
garage. Epoxy paint, rubber mats, floor tiles are some of the commonly
used garage flooring systems.
Rubber mats are easy to install and are popularly used for garage
flooring. Rubber mats are smooth beneath and have a raised designs on
the top. They come in different designs and sizes. They can easily fit
in any type of garage and are also economical.
Benefits of Garage Floor Rubber Mats
The main advantage of rubber mats is that they are easy to install.
You just have to lay down the mats on the floor and the installation
is done. They can fit in any part of your garage. All you have to do is
to cut them according to your need.
Rubber mats are inexpensive as compared other garage flooring
systems. They are available in almost all shapes and sizes at an
Rubber mats provide an insulated, cushioned and anti-slippery surface. They provide comfort to your legs when you walk on them.
They protect the garage concrete floor from chemicals, dirt, grease and oil spills.
Garage floor rubber mats are durable and easy to maintain.
They help to reduce the dirt carried from garage into your house.
This is because, dirt that falls from your car tires or your shoes
adheres to the rubber mats.
Limitations of Garage Floor Rubber Mats
Rubber mats are not good for use in high temperatures. Rubber has a
very low melting point and thus, at very high temperature, the rubber
may melt. If you park your vehicle on the rubber surface, the tires may
get stuck onto the rubber mat.
Rubber mats also have a low resistance to petroleum products. They get damaged to a great extent when exposed to such products.
Installation of Garage Floor Rubber Mats
mentioned earlier, installing rubber mats in garage is a very easy and
a DIY job. The first step in installing rubber mats is cleaning the
garage. The garage should be cleaned properly to remove any debris,
dirt, or cement bumps. It is necessary to ensure that there are no sharp
objects left on the floor. A vacuum cleaner or broom can be used to
clean the garage. Gaps in the garage floor should be filled, if any and
leveling should be done, if required. Then, the measurements of the
garage floor should be taken. Rubber mats usually come in rolls that
are 6-10 feet wide and 70 feet long. It is always preferable to
purchase more of the mat than required. This extra mat can be put to
use in case of damage to the rubber mat later on. Once the roll is
purchased, the mat just has to be laid on the garage floor. Thus,
garage floor rubber mats are installed in a few, simple steps. They are
easy to cut, so one can cut them and adjust according to the garage
Garage floor rubber mats not only provide good
flooring, but also give a different look to the garage. Since they are
inexpensive, easy to maintain and durable, they are the most popular
type of garage flooring.
More related and helpful topics in the link below: