Free Articles, Free Web Content, Reprint Articles
Thursday, May 24, 2018
 
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles
 

How to Be Enthusiastic in Carpet Cleaning of Discovered Molds

Wall-to-wall carpeting, as well as area rugs, can provide an ample breeding ground for mold if conditions are right.  At especially high risk for mold growth are carpeting located below ground level in basements, carpet in commonly moist or damp climates, and carpet that has been wet for any period of time. 

Mold spores are commonly found naturally in the air. If spores land on a wet or damp spot indoors that contains dust for them to feed on, mold growth will soon follow. Carpeting is an area of the home that can be at high risk for mold growth.  In order to grow, mold needs moisture, oxygen, a food source, and a surface to grow on.  

Just because mold is not immediately apparent or visible on a carpet's surface does not mean that mold growth is not in progress.  In fact, mold will probably only be visible on the surface of carpets in unusually severe cases of growth, such as carpet damaged in flooding that has remained wet for some time. 

The best method for combating mold is to not allow mold growth in the first place.  The best way to do so is by ensuring that conditions conducive to growth do not exist. 

Removing Mold From Carpet

In many cases, if mold has grown on carpet, cleaning will not be possible.  If growth has occurred on more than one area of the carpet, or if there is a large area of growth, the carpet will probably need to be replaced. 

Small areas of growth that have been quickly identified can sometimes be dealt with.  Detergent and water used with a steam cleaning machine may be enough to clean the carpet thoroughly.  It is then important to ensure that the carpet dries completely after cleaning to prevent the growth from recurring.  Stronger cleaning agents can be substituted if detergent does not work. 

Anything stronger than detergent or common carpet cleaning products should first be tested on an inconspicuous area of the carpet to ensure that the rug will not be damaged during cleaning.  About 24 hours is a reasonable amount of time to wait after testing to be sure that wider cleaning will not discolor or damage the carpet.

As with all areas of the interior at risk for mold growth, prevention is the best method of control for carpet mold.  Eliminating high-moisture conditions and preventing the risk of flooding or standing water will reduce the possibility of growth.  Inspectors will want to know where to look for and how to identify mold growth in carpeting.  It is also helpful to know how to determine if carpet should be replacedHealth Fitness Articles, or whether there is a possibility of cleaning and saving it.

Seek more safety concern check out pros Auckland Carpet Cleaning for a safer cleaning experience

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR


Graeme Stephens has been running the largest owned Carpet Cleaning Auckland, a leading Carpet Cleaning, Upholstery and Flood Restoration Company covering all Auckland post codes. Contact us today to ask about the services we can offer you.



Health
Business
Finance
Travel
Technology
Home Repair
Computers
Marketing
Autos
Family
Entertainment
Education
Law
Communication
Other
Sports
ECommerce
Home Business
Self Help
Internet
Partners


Page loaded in 0.038 seconds