How to Do It: Steam Tile and Grout Cleaning of Ceramics

Apr 3
10:42

2014

Ma. Theresa Galan

Ma. Theresa Galan

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Steam cleaning your tile grout is the perfect middle option. While a more involved process than just using brushes and cleansers, it's far less complicated, costly, and frustrating than removal and replacement.

mediaimage

Effective floor and grout cleaning signifies that you can quickly remove unwanted germs,How to Do It: Steam Tile and Grout Cleaning of Ceramics Articles grime and bacteria from ceramic tile and grout. The most effective way to do this on large areas or when you are working with outdoor tiled floors is by buying a grout steam cleaner.

Steam cleaners employ high pressure steam to clean off the tile and grout. It is not as much corrosive than pressure washing. Furthermore, the hot temperature of the steam helps to kill bacteria and it is great at cleaning up porous surfaces. It will take you not more than an hour to do the majority of the jobs and you will be very satisfied with the results.

If you're working on a smaller area or cleaning ceramic tile floors that are indoors, you can do the job on your own. Below is an explanation for cleaning ceramic tile grout the fast and effortless way:

Getting Ready for Cleaning Ceramic Tile Grout

Mix a mild grout cleaner with water. If you opt for using vinegar or water, you can dilute these with water prior to beginning. With vinegar, you should use a 1 part to one part mixture. When using bleach, use three parts water to one part bleach then. Each one of these will make a good ceramic tile grout cleaner.

After which, the next thing to do in grout cleaning , is to dampen the ceramic tile, but at the same time trying not to get the tiles too wet. Let the cleaners loosen up the dirt and grime for about 5-7 minutes . This can be done properly uop. Smooth ceramic tiled surfaces clean up pretty effortlessly. You will probably need a grout brush to be able to clean out the grout. You will spend most your time cleaning ceramic tile grout. After you have cleaned all the tile and grout, you should rinse the floor with a 100% water solution. Then you need to totally dry it using a towel or rag.

In the event that after cleaning ceramic tile grout there is still grout discoloration, you may need to use a stronger grout cleaner or a stronger concentration of bleach. Use caution with bleach if the grout you are cleaning has an original dark stain. Following thorough cleaning, it may also be a wise course of action to seal the grout. A good grout sealer lasts a few years and it will prevent dirt and grime from accumulating in the grout crack.

As a bonus, it's a green cleaning activity. No harsh chemicals are needed. Water plus high temps plus some rubbing are enough to get rid of nearly any kind of grout gunk.

Tips for Steam-Cleaning Grout

*Make sure you buy a multi-purpose steam cleaner . Some steamers are floor-only and will not work for shower or bathtub tile. *Multi-purpose cleaners have attachments for different surfaces. *Before using any attachments, first blast the grout with a steam jet to remove the worst of the gunk. Don't expect too much of this, though, as most of your cleaning will happen with the brush attached. *Start with nylon bristles, as they will not damage the grout, no matter how hard you rub. *Use the wire bristle attachment with care. It's your ultimate weapon, but it can chip tile. If you have smooth, glossy tile, a wire brush will almost certainly scratch it! *Work from the the top downward. Every few minutes, liberally douse the steamed area with fresh water to move the gunk down to the drain. If you let liquified gunk remain on the surface, it will harden...and your problems start all over again. After steaming an area, give the machine ample time to build up steam again.

Be guided with professional Tile and Grout Cleaning Auckland for reliable assistance that you need