Practical Measures to Avoid Basement Flooding

Water pours out of your eavestroughs into downspouts. If the downspouts are dumping the water right beside your foundation, it drains directly to the weeping tile and can easily overload your home’s drainage. Make sure downspouts extend at least 1.8 m (6 ft.) from your basement wall. Also, be sure the water does not drain toward your neighbour’s basement walls. It should drain away from your house toward the street, rear yard, or back lane. If your downspouts are connected to your home’s sewer system, or weeping tile, disconnect them.

Clean debris from eavestroughs regularly. If they overflow even when clean, replace them with larger size eavestroughs and downspouts.

If the land around your home slopes in toward the foundation, rainwater heads right for the weeping tile around the basement and can overload your foundation drainage system. The land around many homes settles over time, and then slopes in toward the foundation. If your lot slopes inward, you’ll want to fill in and grade the lot so that, for at least 1.8 m (6 ft.) out from around the foundation, the land slopes away from your house.

Build up the ground around your house so that water drains away from your basement walls. Also, examine sidewalks, patios, decks and driveways. These can settle over time and cause water to drain back towards your basement walls

Extend downspouts so that water flows away from your house and does not collect next to the basement walls and windows.

Proper drainage helps to:

• reduce the amount of water flowing to your home’s sewer system and to the main sewer system, and lessen the risk of sewer backup;
• reduce water seepage into your home through basement windows and cracks in your basement walls;
• keep the moisture content of the soil around and under your house stable to reduce the chances of cracking and shifting. If water collects next to your basement, it can make its way to the footings that support the basement walls. The increased moisture may cause the footings to heave or settle; and
• extend the life of your sump pump by reducing the amount of work it has to do.

Be sure that any drainage improvements you make do not cause water to flow onto your neighbour’s property.

If your home drainage system or the neighbourhood’s drainage system overloads, you may still be able to prevent rain water and sewage from backing up into your basement by installing one or more floodproofing devices, such as sump pumps or back flow valves. Each installation is unique and some devices (back flow valves) may require a plumbing permit. Check with your municipal office or a qualified plumber before you proceed with any installation

A sump pit drainage system includes a sump pit, a sump pump and a discharge pipe. The sump pit, set into the basement floor, collects water from the weeping tiles around your basement. The pump pushes the water outside your house through the discharge pipe.

For more discussion of this topic, check the links below:

flooded, flood restoration, water damage