Prepare Before Your Clean Carpet Efficiently

Mar 11
11:25

2012

Ma. Theresa Galan

Ma. Theresa Galan

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

All cleaning professionals should utilize the following procedures before, during, and after the carpet cleaning process:

mediaimage

Inspect carpet for visible damage - Carpet should be inspected thoroughly prior to beginning the cleaning process. Note stained areas,Prepare Before Your Clean Carpet Efficiently Articles areas of heavy traffic, snags, pulls, separated seams, depressions, etc., or other facility damage that may later be attributable to services provided. Notify home owner of identifiable damage.

Dislodging dry soil - Carpet fibers should be agitated prior to clean ing, using a pile rake or mechanical agitation to loosen dry particulate matter

Dry soil extraction - Thorough vacuuming to remove loosened dry soil should take place prior to the application of cleaning solutions. Vacuuming should consist of one forward and back pass in one direction, followed by two perpendicular passes.

Pretreatment of spots - Administer to all spots prior to beginning the cleaning process. Follow accepted spot removal (carpet stain removal) procedures for effective spot removal (carpet stain removal).

Pretreating areas of heavy soiling - In many instances, it may be necessary to pretreat areas of moderate to heavy soiling with a detergent solution prior to beginning the cleaning process. A solution comprised of biodegradable detergents, alkaline builders, and/or selected dry solvents should be applied to the carpet. Avoid over spraying onto surfaces other than the carpet. Pretreating soiled areas emulsifies soil and facilitates removal. Solution should be applied directly to the carpet fiber and agitated using a pile rake or mechanical agitation. Agitation should not be so vigorous as to cause pile distortion or premature fiber wear. Most solutions require 8-10 minutes of dwell time to begin the emulsification process.

Preconditioning solutions may be applied using a hand-pump, pressurized sprayer, electric sprayer or other means necessary to ensure uniform distribution of cleaning solution.

Soil removal - Following preparatory suspension and emulsification activities, soil, moisture, and detergent must be physically removed from the carpet. All carpet cleaning methods utilize some form of extraction capability to accomplish this task.

Pile grooming - For consumer acceptance and appearance considerations, an effort should be made groom the carpet pile to orient pile in the same direction and to eliminate swirl marks and wand marks. Also, pile brushing is necessary to uniformly distribute carpet protectors and other post cleaning topical treatments and to ensure proper drying.

Drying - Precautions must be taken to ensure complete drying within 12 hours following extraction. Failure to accomplish complete drying within 12 hours should facilitate corrective action. Under no conditions should the carpet remain wet for longer than 12 hours. The carpet cleaner may use drying fans, dehumidification equipment, the facility’s heating, ventilation, and air conditioning system (HVAC) or other means necessary to ensure complete drying within 12 hours.

Disposal of recovered solutions - All recovered solutions should be disposed of in a manner consistent with federal, state, and local regulations.

For more info, check the links below:

carpet cleaner, carpet cleaner east auckland, carpet cleaning