A Plumber Can Repair Burst Polybutylene Pipes

When there’s a water leak, polybutylene pipes may be to blame and a plumber will need to be called. Polybutylene is a type of pipe that was thought to be wondrous back in the 1970’s. It was a product expected to revolutionize water pathways into homes due to its low cost, simple installation and flexibility. Unfortunately, this did not turn out to be the case. As with all newfangled inventions, after being used a bit, unexpected flaws begin to surface. This is exactly what happened with these supposedly magical pipes.

Everything would have been fine if it wasn’t for the fact that chlorine eats away the plastic. Most cities have chlorine in their water systems as a purifier and bacteria killer. Unfortunately, it is also a polybutylene killer. This product is guaranteed to fail eventually, but the average time frame is usually around fifteen years. Because the deterioration is occurring on the inside, even a close inspection may miss the damage. Without warning, these tubes will suddenly burst.

Because this product was considered to be top-notch in plumbing materials, one quarter of all homes built in the late seventies through the mid-nineties were equipped with them. Although a thorough home inspection has become a routine ceremony in a real estate purchase, these products are not always apparent to the inspectors. Not only are most of the pathways hidden under dirt or inside of walls, but in addition some of the visible end pieces were copper, making it appear as if the entire system was plumbed with it.

When a burst occurs, aggressive action will need to be taken. With other piping products, a simple replacement can take care of the problem. This is not the case with polybutylene. When one portion has begun to leak, it’s almost guaranteed that the remainder of it is in similar condition and just waiting to spring a geyser. Instead of a patch job, the cost of a full replacement will be necessitated. Depending on the accessibility, the price-tag for fixing the leak will be more than double what copper or brass would cost to fix.

A hypothetical example of a water leak involving polybutylene is as follows: A homeowner notices water pooling in the garden beside the house. A handyman thinks it’s just a frozen sprinkler and repairs it at a cost of $90. Unfortunately, the water continues to pool. The handyman comes back, digs deeper and finds a break in the main line to the house. He says, “call a plumber! This job is over my head.” The plumber arrives and sure enough, it’s the faulty poly-pipes. What would have only cost $250 in repairs now costs nearly $700 as the full 30 feet of piping must be replaced along with lots of digging.
Leaks happen but if the faulty pipe material is to blame, it’s better to replace them rather than to try to patch them. Otherwise, it will be just a short time before another burst occurs. For times like these, a reputable plumber will come to the rescue and fix the problem.