Cleaning Dirty Swimming Pool Water Easily

Sep 13
07:24

2012

Pia Velarde

Pia Velarde

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Summer is not yet over. To enjoy the remaining days of vacation, we commonly go to the beaches to enjoy the water, sand and sun. However, it’s not alw...

mediaimage
Summer is not yet over. To enjoy the remaining days of vacation,Cleaning Dirty Swimming Pool Water Easily Articles we commonly go to the beaches to enjoy the water, sand and sun. However, it’s not always convenient to beaches and we tend to settle with home pools and resorts nearby.

With this, we expect to plunge into the coolest and cleanest water. But it can be disappointing to see dirty pool water along with floating objects around.

For swimming pool owners and commercial resort holders, it’s always advisable to maintain the neatness and freshness of the pool water. Hiring a pool cleaning service can be an option but knowing how to clean the pool yourself is a good option too.

Clean the floating debris on the water


The first and foremost step in cleaning the pool is to remove the floating debris such leaves, twigs and other objects. You can use long-handled leaf net to catch the debris.

On the other hand, remove any traces of algae as soon as you see any formation. You can use a brush to remove the algae which are commonly seen on the sides of the pool. Algaecide can help you remove the growth of algae on the pool.

Check the alkaline level and pH level

Make sure that the alkaline and pH levels are properly maintained. This prevents scale formation or calcium deposits on tiles, filters and the overall water condition. Pool service in Palm Beach suggests that the ideal pH level for swimming pool is 7.2 - 7.8 and anything below and above basic and acidic. You can buy tools and measurement through local suppliers.

Add Chlorine into the water

Every swimming pool needs mixture of chlorine on its water since it kills the presence of germs and algae. Depending on your pool size and water volume, gallons of chlorine is needed to remove the bacteria which will take a couple of days to get rid of.

Test the filter

Make sure that the pool filter is working properly and let the water flow correctly. If clogged, wash the filter and test if its functioning well again. If not, don’t hesitate to replace the filter with new ones.

Additional tips

Don’t use hot water it cleaning the pool since it encourage the algae growth. You can also cover the swimming pool during off-seasons to prevent debris and algae on the water.