Get Rid of Black Mold - A Guide to Safe and Effective Mold Removal

Apr 25
08:05

2011

Kelsey Libby

Kelsey Libby

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Black mold is a dangerous fungus that can harmful to both your home and your health. Because it is often hard to determine the specific genus of mold, it is best to treat all contaminated areas carefully and safely. Here is some of the most important information to arm yourself with, when it comes to mold removal and your health.

mediaimage

If you belong to a country which has a humid environment throughout the year then the chances of you facing the black mold problem are very high. Getting rid of this problem is very tough,Get Rid of Black Mold - A Guide to Safe and Effective Mold Removal Articles as it is a big time problem. Even if you manage to get rid of this problem, it is very difficult to stop the growth of these molds completely. A place that has a humid environment throughout the year is considered as the main breeding ground for black molds.

In my article, I am going to suggest you ways which will help you stop mold growth in your home. This problem arises mostly in the moist environments. In such an environment, mostly watery type molds, known as Hydrothermic molds, grow. They grow in the places where there is enough water and a good source of food for the molds. To get rid of this black mold, decrease the level of humidity. Try to keep the things that are around dry. Have proper air ventilation to stop the mold growth.

If your dry walls are wet, remove the mold as soon as possible. Check out as to how much water your dry wall takes and make a decision of removing the mold accordingly. By doing so, you will get rid of numerous health problems, and there would be no need to go for expensive mold removal procedures. If you see some water stains on your wall, it means that you have a humid environment that is a favorable place for the growth of mold. This means that it is the time for you to remove the mold from the wall. However, if there are little stains, you can get rid of the black mold by just using the mold removal spray.

Check under the carpet the tack strips. If they smell rusty and are wet and stained, remove the tack strips immediately. Wet and stained strips shows there are water leakages in your house and the strips need to be replaced. When putting the new strips, put mold blocking solution in them before fixing them.

Check the air filters carefully on a regular basis. Use HEPPA air filters instead of ordinary ones. These have smaller filtration methods, which easily catch the mold. Also, have a proper air ventilation system.

All the above methods are basic and easy methods to stop the growth of black molds. By following these methods, you can reduce the chances of the growth of these toxic poisonous molds. Make sure that you stop the growth of black mold as soon as you detect it, because if they are allowed to grow, they can be a real big problem.