Safety Procedures to Follow When Doing Indoor Lighting Projects

Feb 2
09:47

2012

Ashley Woods

Ashley Woods

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Indoor lighting projects can be done on your own if you’ve got the right skills. Changing the light fixtures and replacing the light bulbs are rather simple electrical activities. If you can accomplish these things by yourself, you save a great deal of money from hefty service fees you need to pay to the professional electricians. But before doing the repairs and replacements on your own, it’s very essential that you follow certain safety procedures.

mediaimage
Indoor lighting projects can be hazardous if you don’t exercise caution. Huge volts of electricity can cause injury and they can kill. In order to avoid causing harm towards yourself,Safety Procedures to Follow When Doing Indoor Lighting Projects Articles it’s always important that you turn off the power before doing any repairs or replacements. This rule must be observed at all times. Even highly-skilled electricians wouldn’t risk touching electrical circuits not until they have turned off the power.
As soon as you have turned off the main power, it is critical that you double check this status. Always have an electrical tester on hand so that you can guarantee that all electrical connections are totally shut down. Preferably, you should do the switching of power on and off by yourself because getting someone else to do this can lead to confusion.
To be completely safe, it is also highly recommended that you make use of safety electrical gadgets and tools. You should make it a point to wear rubber gloves and rubber boots especially when you are working in damp areas like your bathroom. Water and electricity isn’t a good combination. You can minimize the danger of running the current through your hands and feet by wearing these safety gadgets. Just be certain that there aren’t any holes present in them.
 If you are working on changing your indoor lights affixed in the ceiling, make sure that you utilize safety ladders that are sturdy. Instead of using aluminum ladders, it is highly recommended that you use ones which are manufactured from nonconductive fiberglass. Before you climb up the ladder, be sure to lock it securely. Also, clear the path so that there are no wires looped around the legs to which somebody passing by may accidentally trip and cause you to fall.
 Finally, always practice to wear safety goggles. Dust and dirt from the ceiling can get into your eyes and being situated high up can subject you to the peril of falling when you lose your footing to get away from the falling debris. Plus, short circuits can happen and sparks can fly so it is best to protect your organs of sight.