Things You Need To Know In Installing Solar Panels

Jun 29
11:28

2010

Gary Foley

Gary Foley

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Installing your solar panels should be done in the proper and safest manner to ensure you obtain maximum results in creating a renewable energy source.

mediaimage
In case you are choosing to install solar panels to generate a renewable energy source in your home,Things You Need To Know In Installing Solar Panels Articles then you would likely wish to make this solar panel setup as discreet as possible. Placing your setup on the roof of your home would be one of the most practica choices. Other options include a backyard space that do not presently have a purpose.

Pertaining to the site you wish to place your solar panel installation on, you want to ascertain it is an area that has more than an adequate amount of sun available to it, or you will have difficulties with power generation. That is another factor why people typically choose the roof of their home or business for installation.

Another installation consideration is how to place your panels. You can place it flush to the ground or roof, but you want to purchase a mounting system. Know also if you need to tilt your panel to get the optimal amount of direct sunlight. If you are roof mounting, set a good schedule to install solar mounts at a time when you are re-doing the roof. This can flash in your solar mounts and eliminate any leaks.

The general setup in solar panel installation includes: installing the mounts, place your solar panels up, and connect the panels into a channel into your power inverter. In installing your mounts, ensure that they are always following a straight line. Roof mounts need to be secured to the rafters. The rafters can be found with a stud finder. Secure the rails to the mounts, and use the same rails to install solar panels. The panels then ought to be linked together into a line.

While a solar energy system is installed outside of the home, the inverter is usually partially installed within the home. The solar array system is linked to the inverter. The inverter is what takes DC energy that the system has generated from the sun, and changes it into AC power for the home to use. An inverter is also typically linked to the utility company to synchronize the electricity.

You will need to inquire from your local municipality to see if they have the option for utility companies to re-purchase any excess power produced from your home. In any case, it is a practical idea to have the power company linked to your solar panel installation so that you have a backup energy source.