How to DIY embossed iPhone 5S case

Do not put the dry petals on the iPhone 5s case unless the stacking height of these petals is not more than 1.5 mm,make sure the dried petals are suppressed very flatly.Main material:iPhone 5s case a (white) a bottle of AB epoxy glue a box of colored sequins several driedTools required: A transparent plastic cup a ice cream stick a Marking pen Marker a timer a bottle of glue a ruler a bottle of nail polish remover 2 pieces of swabProduction steps:Step 1:buy resin glue in the hardware storeStep 2: Clean iPhone 4 case, make sure nothing left on the back of iPhone 5s case. Above are some of the samples.Step 3: Take out of dried petals, put the petals on the iPhone 5s case.Step 4:   Follow the trick on how to place the petals, those with light color on the top, dark below.Larger petals coated with a little glue stick to the iPhone case.Step 5: Put the ruler into a plastic cup, mark 3/8 inch (about 9.5mm) and 3/4 inch (about 19mm).Step 6:   Pour resin into the first plastic cup to 3/8 inch, waiting for 2 minutes set by the timer, stir with the ice cream stick.Step 7:    Pour hardener into the plastic cup to 3/4, wait for 1 minute, stir with the ice cream stick. Add color sequined armor according to your need. Still for 5 minutes.Step 8: Poured the resin onto the iPhone 5s case from the middle to around.Step 9: Smooth resin with the ice cream stick,make sure there is none of air bubbles between the resin and flower.Step 10: After standing for 1-2 hours, use a cotton swab dipped in nail polish remover to clean the resin overflowed on the edge of the iPhone 5s case.   For more information about iPhone 5s case,please visit http://www.onu-mall.com/catalog/iphone-accessories/iphone-5-5s-case-cover/   Article from http://blog.onu-mall.com/index.php/2015/09/16/how-to-diy-natural-embossed-iphone-4-case/