12 Volt TV Upgrade for Semi-Trucks and RVs
Each RV, semi-truck and motor home deserves a real AC DC television. The thing many people don’t know is how easy and advantageous the standard television upgrade might be. Most vehicles, which are equipped with a television, use a power inverter for supplying the television with power when the generator is off. You know what? It’s disastrously wasteful.
Have Fun Upgrading Your Television System
Lest the vehicle originally had a very expensive inverter,
its effectiveness is probably lower than 92%. It means, when the television is working and the inverter gives it 8%, and other 92% just go directly in the trash. Most RV and motor home televisions are power hogs, resulting in around 10amps. If this is the reason, then the inverter has to draw almost 12 amps for television powering.
An actual 12 volt TV DVD will require around 5 amps. It means you’ll save more watts and amps. This is when the upgrade is getting interesting. These devices usually come with 12V and 110V power cords. The 110V cord will usually adapt the power for 12V before it will achieve the television set. The implemented 110V power cord is an awesome way to not use more power than needed. So, when you’re staying at a facility, which supplies 110V shore power, you can feed your 12 volt TV DVD from the shore in order to save your onboard power.
Usually, the new 12V television set installation is fairly simple. The tube television will commonly fit exactly into a cabinet that motor homes have, or on the night-stand shelf that semi-trucks have. The flat panel 12V televisions have a foundation, which is awesome for standard installs, but might be simply substituted for mounting onto wall. These flat panel television sets are compatible with VESA wall mounts. With the appropriate wall mount a 12V television set might be practically installed in any location, which has 12V power supply.
If a wall mount, which is to be used, is retractable or has an articulated arm, the television must be secured prior to the car starts moving. Most individuals will employ some kind of damper cord to hold the television from falling down off the wall, while the vehicle is moving. You don’t want your television to hit you in the head when you’re watching it, or even simply sitting under it.
The majority of cars made for traveling also have some kind of an in-built antenna. Many manufacturers might also install a booster for antenna. In fact, these should still work properly after your digital transition is fulfilled. At first, make certain that the producer didn’t already install a booster, before you install a new one. You should note that if you have two boosters, you won’t have double power. In the majority of times, the signal will simply get useless. At times, one booster can break another one.
Basically, these are the most significant things you should take into account when you shop for a new 12 volt TV DVD for your RV, motor home, or semi-truck.
