Brief introduction of decorative coating and functional coating

Surface treatment for table with IPG, IPS, IP Black, IPR (rose gold), IP titanium, IP tungsten steel, IP coffee, and T / T; metal-ceramic composite membrane (CCF) can be used in watches, hardware , electronics, precision machinery and equipment and other fields of surface treatment products; colorful film is prepared in the crystal, topaz, zircon and other precious or semi-precious stones on decorative films.Feature film is divided into diamond-like carbon film and tool dura mater. Diamond-like carbon films (DLC) has high hardness, high resistivity and good optical properties, and also has its own unique tribological properties, in machinery, microelectronics, aerospace, biomedical and many other areas on a wide range of applications; tool dural (Hard Film for Tools) allows for superior cutting tool mechanical properties, not only can effectively improve the tool life, but also significantly improve the machining efficiency.Prepared using PVD vacuum ion plating technique, commonly known as "the furnace gold." It consists of layers of gold and titanium nitride (imitation gold layer) constitute two basic layers, the surface of the gold layer is mainly used for decoration,Zinc oxide as imitation gold titanium nitride layer, a metal nitride ceramic layer, the main effect to abrasion, corrosion effect Thus, the "furnace Gold" (IPG) durability; · gold in a vacuum furnace to complete the film all kinds of color, for example: 2N18, 3N18, 1N14, Hamilton and various shades of gold, without the need for re-entry "water fund" other color plating tank. IPS (Ion Plating Stainless steel & SiO2) which is a metal-ceramic composite film (Cermet Composite Film referred to CCF) of a product family. It is metal and crystal (SiO2) or metal and sapphire (Al2O3) crystals such as two different ceramic materials dispersed in the plasma state composite. Because it focused on the characteristics of metal and ceramic crystals, so that the coating than conventional PNP, PCP, PDP is more resistant to abrasion, corrosion, and its membranous hardness of stainless steel 3 times!Black IP (Ion Plating Black Film, referred to as IPB), also known as TiC, used in the watch appearance parts or tools, molds and other products of the hard surface of the plasma membrane and decorative films, Vickers hardness is generally 2000 ~ 3000HV. Coated using new technology, color was pure black, the color is more than the average black IP gun, more wear-resistant and can be between the electrical (T / T). IPR (Ion Plating Rose golden, referred to as IPR) using PVD technology is made in the preparation of a special process, the water rose gold plated with a more wear-resistant than (IPG is more than twice). Corrosion-resistant, easy to change color, can be detected through the ISO3160 international standard.Metal-ceramic composite membrane (CCF) is the initial development of the watch appearance parts from the beginning, is now being used in aircraft engine blade metal-ceramic coating technology research. In addition, this research in the field of application of non-metallic discovered some new features, Titanium dioxide can be widely used in watches, hardware, electronics, precision machinery and equipment and other fields of surface treatment products.DLC (Diamond-like Carbon) referred to as the DLC, as a series of diamond-like nature, as it has high hardness, high resistivity and good optical properties, and also has its own unique tribological characteristics of diamond-like carbon membrane in the machinery, microelectronics, aerospace, biomedical and many other areas on a wide range of applications. Has become the world one of the hot material field. Diamond-like carbon films have excellent mechanical properties. Its high hardness, maximum hardness value close to the diamond. Diamond-like carbon films under atmospheric conditions showed a low coefficient of friction, so the field can be widely used in machinery wear parts such as gears, bearings, pistons, and tools, measuring tools in the. In the aerospace industry, as diamond-like carbon film has a good self-lubricating properties, without the use of oil, it is particularly suited to do the wear-resistant coating. DLC films with good optical properties. It has good optical transparency, wide optical band gap, it can be used as optical lenses on germanium and silicon solar cells as antireflection coating and protective layer, Barium titanate the infrared optical lens coated on diamond-like carbon films can play AR and protection can also be plated in a spacecraft or other optical instrument for window protection film. In recent years, diamond-like carbon films in the field of microelectronics and biomedical research has become the hot application. As the DLC lower dielectric constant, and easy to film on the big base, is expected to become the next generation of integrated circuits instead of SiO2 dielectric material. DLC good field electron emission properties, is expected to be in the flat panel display applications. In the biomedical field, it has good biocompatibility and their good wear resistance, corrosion resistance, oxidation resistance, hydrophobicity and other properties, can be used as artificial joints and artificial heart valves, protective layer.  Source:http://www.mhcocm.com