Free Articles, Free Web Content, Reprint Articles
Sunday, February 28, 2021
 
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles
 

Lost Wax Casting Information and Types of Lost Wax Casting

Lost Wax Casting is known as Cire Perdue in French. It is a process in which an artistís sculpture is used to cast bronze. The Lost Wax Casting method is also known as† Investment Casting in th...

Lost Wax Casting is known as Cire Perdue in French. It is a process in which an artistís sculpture is used to cast bronze. The Lost Wax Casting method is also known as† Investment Casting in the modern industrial world. This is a very ancient method used for casting small bronze sculptures, but today it is used to make many different artifacts and the process varies from foundry to foundry. Today this developed method of Lost Wax Casting is used to make articles like fine jewelery, show pieces, dental restoration, a few specific industrial parts and also some machine tools.

Process of Lost Wax Casting:

Rough Sculptor making: A creative artist makes an original sculptor or mold or an artwork by using raw material like wax, plaster of Paris or clay. A mixture of oil based clay and wax is preferred as these materials retain their softness.

Final Mold Making: A mold is then made as per the original sculptor. The mold is made up of two pieces and a key with shim is placed between the two pieces during construction so the mold can be put accurately back together. Molds are generally made using plaster or fiberglass or any other material that may be suitable. An inner mold of latex or vinyl or silicone is put pup preserve the details of the original art work. Generally, the original art work made of plaster mold cracks and breaks during the initial phase of deconstruction. Many a times, numerable molds are required to get the exact replica of the original art work.

Filling up the mold: Once the latex and plaster mold is complete and finished, molten wax is poured into the mold till it gets an even coating all around the mold. The thickness of the wax coating is around 1/8 inch. This process is then repeated until the desired thickness is achieved.

Removal of wax replica: The hollow wax replica of the original art work is then removed from the mold. The original mold can be used for making more wax replicas, but due to the wear and tear of the original mold the reuse of the mold is limited.

Softening: Each wax mold is then chased or softened using heated metal tools. The metal tools are rubbed around portions that show cracks or the joining line of the mold, where the pieces have come together. Separately molded wax pieces are then heated and attached. The finished mold is then dressed in order to hide any imperfections. The final piece then looks like a bronze sculpture.

Making paths for molten bronze: It is also known as ďspuringĒ, in short the wax copy is then branched with treelike wax, so that the molten bronze reaches the right parts and also it helps the air to escape. The critical and careful spuring begins from the top of the wax copy. The top of the copy is attached to by wax cylinders to different points on the wax copy.

Slurry, burnout, testing, pouring, release, metal-chasingHealth Fitness Articles, and painting are the final steps in the process of Lost Wax Casting.

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR


Go to Metal Casting Zone to get your free ebook on Metal Casting. Metal Casting Zone also has a Metal Casting Forum, Metal Casting Information, and a Metal Casting Blog with daily news on Metal Casting. Go to www.metalcastingzone.com to visit the site.



Health
Business
Finance
Travel
Technology
Home Repair
Computers
Marketing
Autos
Education
Entertainment
Family
Law
Other
Communication
ECommerce
Sports
Home Business
Internet
Self Help
Partners


Page loaded in 0.119 seconds