Points to Consider While Choosing RF Remote Control
The ability to control a multiple rooms, devices, whole house or building from the RF remote allows the consumer more freedom to enjoy the environment of their surroundings.†
An RF remote is a great solution for folks who want to set up additional listening or viewing areas that are within 50-100 feet of their main system. RF remote controls is a great solution if you are moving into a condo or house that you have not had the opportunity to wire exactly according to your needs.
Programming and learning functions are easy and will simplify the operation of your system and reduce clutter. Many remotes have Macro Command capability, which can execute several system functions with the touch of one button.
While RF remotes are more expensive than the more standard Infrared alternatives, they justify the cost because their range is greater and they donít rely on Line of Sight also known as LOS. Unlike infrared remote controls, RF remotes don't require line-of-sight to send commands to your gear, since RF signals can travel through floors, walls, and cabinets.
If, all your equipment is not in the same room or location. Then is likely you need a programmable remote control system.† It's also a good fit for folks who want single-remote simplicity for their entire system.
Here are some considerations that you may use in choosing among the different choices within the marketplace.
1) Spend some time using your system and make a few notes. Depending on the types of electronic devices you have currently, you will find a remote or remote system that can control the various functions including power, play and record modules, adjustments and channels.
2) Do choose an RF remote that's also a "learning" remote ó one that you can program to control all of your audio/video gear. With just one remote, you'll enjoy simplified, streamlined system operation.
3) It is highly recommended to go about this task is to discover what kinds of device you will mainly use the remote manage for.
4) If you plan to make use of your remote manage program for pieces of device that are all placed in one space, then itís crucial that you take the size of the space into consideration.
Consider the size of the room, if some components are in a closed cabinet or
equipment closet, or if the components are in different area or different
directions in reference to the line of site to your remote infer (IR) red beam.
Source: Free Articles from ArticlesFactory.com
ABOUT THE AUTHOR
This particular article was organized by Devang Kakkad who frequently shares knowledge on the subject areas of technology and communication. He has also written detailed reviews of the best two way radios out there. He recently published his review on TriSquare TSX300 and Cobra CB Radios.