The Best Way To Inspect The Xbox 360 Dvd Drive Repair

Dvd drive is one of the most important components of the Xbox 360 and it also gets damages very easily due to its frequent use. Sometime dust or some other components, which get into the hard drive or lens, damages it badly. The best way to inspect the Xbox 360 dvd drive repair is to check it physically, so that you come to know about all its defects or some other problems. This thing helps you in fixing the drive and if necessary then you can replace it also. There are some useful guides, which will help you in inspecting your Xbox 360 dvd drive in better way.The first thing you need to do for Xbox 360 dvd drive repair is to unplug the Xbox 360 drive from power source, because this will ensure complete safety from being electrocuted. Flip the main cover and find the screws, you will get them near the rubber feet, at the bottom of the device. Try to remove all the screws with the screw driver and make sure that you keep all the screws at some better place because you need to replace them as well after completing all the inspection. Then you need to lift up the top cover of your Xbox and then proceed further for rest of the inspection.Now there comes the main part of the Xbox 360 dvd drive repair, which is the actual inspection of the dvd drive inside the Xbox. You need to remove the dvd drive from the Xbox 360 console. For this you need to remove two screws from the dvd drive, after that you will find two catches, push them inward. This will pop off the cover of the dvd drive and you will be able to get the clear image of the dvd drive. Check if there are any physical damages on the hard drive, if yes then replace it with the new one. Otherwise, clean it with cotton swab in order to remove all its dust or some other debris. This will make your Xbox 360 free from jitter and errors, when you will play all the games on this device.