Wheel bearings are an integral component of the car's suspension. These ensure smooth rotation of the wheels and also support the radial and the thrust load. The weight of the vehicle and the thrust load that the wheels are subjected to while taking steep turns, is borne by them. These also help in minimizing the friction between the wheel and the axle.
Wheel bearings are an integral component of the car's suspension. These ensure smooth rotation of the wheels and also support the radial and the thrust load. The weight of the vehicle and the thrust load that the wheels are subjected to while taking steep turns, is borne by them. These also help in minimizing the friction between the wheel and the axle. It is the smooth wheel movement that ensures a smooth ride which is why these must be changed as and when needed. If you have been experiencing steering problems or often hear grinding noises, creaking sounds or unusual vibrations while driving, you must have your car's suspension system checked. Given below is some information on the common bad wheel bearing symptoms along with ways to tackle this car problem.
Why Do Wheel Bearings Get Damaged?
The mechanical devices in your car are constantly in use while you are on the road. While the bearings are engineered in such a way that they can support the vehicle's weight and facilitate smooth movement of the wheels, these can also reel under stress due to excessive use of the vehicle. So, if your job requires you to travel a lot by road or you love going for long rides every now and then, not only will your car eat up miles, the bearings may also get worn-out sooner than you may expect. This problem must be addressed at the earliest. These can get damaged due to various reasons. Leakage from the oil seals that coat the bearings is one such issue that needs to be taken care of. At times, dirt may enter the bearing cavity, and hamper the working of the bearings. If the seals of the bearings are loose and water manages to seep through, these may rust due to exposure to water. If such damaged bearings are not replaced soon, the safety of those traveling by such a vehicle would be compromised.
What are the Common Signs of Damaged Wheel Bearings?
This problem that must be fixed immediately. Road disasters that may be caused due to this problem could be averted if one pays attention to the aspect of car maintenance. If one is aware of the signs of such common car problems, one can make necessary repairs. Here is some information on the signs of damaged bearings along with tips on what a car owner must do on noticing such signs.
Noises From The Wheel: If squealing noises get louder as your vehicle picks up speed, it is indicative of worn-out or damaged bearings. So, keep your ears open for any unusual noises that may arise from the wheel or the tires as you turn your vehicle. Car repair is definitely needed under these circumstances.
Find out more aboutCenter Bearings by visit miparts.com.
How to Change the Sway bar bushing and sway bar endlink on new beetle (1)
The sway bar (sometimes called anti roll bar) connects the left and right suspension to the front subframe. There are bushings on the middle and ends (end links). Your VW TDI only has a sway bar in the front, there is no sway bar in the rear because it's a torsion beam suspension.
How to Change the Sway Bar Bushing and Sway Bar Endlink on New Beetle (2)
Raise the front end of the car, chock the rear wheels, remove the front wheels, rest the car on jack stands, and make sure the car is safe and secure before getting underneath at all, see the TOS Agreement for the legal disclaimer.
The Working Principle of Independent Front Suspension (4)
Overall, with the vast plethora of Mustang II-style IFS kits ranging from basic budget setups to fully polished showpieces on the market today, there is very little reason to go with a used Camaro front clip.
