No one actually plans for mould removal in their business, or house when they build one. However, when the nasty moulds find their way into your building there is no other way than to get rid of them....
No one actually plans for mould removal in their business, or house when they build one. However, when the nasty moulds find their way into your building there is no other way than to get rid of them. Moulds could be due to the presence of excess moisture, flooding, sewage, or any water damage problems. If not removed at the earliest, moulds may cause health problems; and may even cause damage to the building. Several companies have been established for mould removal in Brisbane. However, before hiring a mould removal company, the building owner must be highly cautious, as knowing the right steps can help you save your money, and time.
But however if you would like to remove moulds by yourself, you could follow these steps to remove moulds like any other professionals.
1. Soap, And Enough Water.
If the mould growth is not too deep, soap and water would be more than enough to clean the mould off. All you need to do is use a strong cleansing soap, and scrub the affected area. Then wash if the dirt with plenty off water, you would slowly see the floor smiling at you.
2. Chlorine Beach.
Chlorine Beach contains hydrogen peroxide, a strong oxidising agent. These solution even contains antibacterial, disinfecting, and sterilising properties that can verify well used for cleaning the moulds off. Before using, mix a cup of bleach in a gallon full of water, and pour the solution into a spray bottle. Then, spray the solution on to mould affected area, but make sure that the surface is not metal, cloth or wood, as the bleach could leave a stain on these surfaces. The bleach should kept out of reach of children, as ingestion of this would cause internal damages.
3. Tree Tea Oil.
This uncommon substance used for cleaning moulds is in fact pretty effective. It can be quite expensive when bought in large quantities, but can act as an home remedy against moulds. Tree tea oil, is usually a strong ingredient, and it holds the property of antibacterial, antifungal, antiviral, and antiseptic properties.
If consumed in the pure form, it can cause severe internal damage. Mix one teaspoon of tea tree oil, in a cup of water. Mix the both well, and pour it in to the spray bottle, and spray it over the affected area. Then let it sit and dry out. The solution works well on any thing.
4. White Distilled Vinegar.
White distilled vinegar has been in use from earlier times for removing the smell of mould, or mildew. However, this vinegar should be used in its pure form without mixing it with anything else. It should be sprayed over the damaged areas, and should be left to dry.
You could remove most if of the moulds with these methods. However if the mould still persist you would have to call in a mould removal company. As there are plenty of companies offering mould removal in Brisbane, this wouldn't be much of a problem.