Guide to Repairing Holes in the Gutter

Repairing the gutter yourself can be a good idea. Most of the damages that a gutter usually suffers can be repaired by you on your own. This is also a cost effective option as you only have to spend for the materials required for the repair work. Read ahead for a guide on how to repair your gutter.

First of all, you need to know the type of materials that are used in the gutter repair process in Seattle. The main materials required are roofing cement and sheet metal, whereas the required tools include a wire brush, some sandpaper, a knife and tool to apply the cement, preferably a trowel.

The first step in the gutter repair process in Seattle is to clean the hole in the railing. It is essential that there are no debris in the hole that can fall off later rendering your work useless. This is why it is advisable to clean the whole gutter. This gives you a clean surface area to work on, making the whole process easier.

You are advised to concentrate the force of the water or air, whichever you are using, into the hole to ensure that the smallest bit of debris is removed properly. However, a problem with water to clean the area is that you have to wait for it to dry up completely before you begin the procedure of filling it up.

Stubborn pieces of debris and dirt may be removed with a wire brush or something long and rigid to help you clean up effectively. The sandpaper can be used to remove any loose particles around the whole. This is also an important part of the repair work.
Once the hole has been prepared for cleaning, you can get on with mixing the roofing cement according to the instructions on the pack. Once the mixture is ready, make use of the trowel to apply a thick layer of cement. If the hole is a small one, it will require only a cement covering. Make sure that you apply at least three to four inches around the hole.

Larger holes, on the other hand, will also require a metal sheet. First apply a thick coat of cement around the hole. Before the cement sets, place a cut piece of metal over the hole. The metal sheet must be cut in advance and to the right size of the hole. Put the metal sheet in place and press it down till the cement sets it in place. Over this, apply another layer of cement and even out the surface to ensure a smooth flow of water.

However, hiring a professional to do the job has its own set of advantages. A professional will have their resources ready before hand. They are well experienced in the job and are guaranteed to finish it must faster, saving you a lot of your valuable time. It will also leave you with time on your hands to attend to other important work. Moreover, the cleanliness of a professional’s work is bound to be better than your own. Having better efficiency and knowledge gives them an edge over your work. Finding a gutter repair service in Seattle is not a tough task. Simply search on the internet for some of the gutter repairing companies in Seattle your city or locality.