Ten Fatal Weaknesses for Digital Video Camera II

Nov 5
07:58

2010

Joice Feng

Joice Feng

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Nowadays, the digital camera is frequently used in our daily life. Therefore, how to maintain it has become a concerned issue for the users. We can know about some maintenance methods from the sale-man, if we purchase it in the shop. However, if you purchase it from the online store, sometimes you often can find out the simply instruction in the manual.

mediaimage

Water and Moisture

It is easy to cause circuit fault or make the lens get mildew,Ten Fatal Weaknesses for Digital Video Camera II Articles if the digital video camera was kept or working under the deep humidity circumstance. The video head is easily damaged, so that we need change it regularly. However, the service life of the camera does not only depend on the material, also is related with the air humidity. The heavier the air humidity is, the heavier the damage is. Usually, the service life can be prolonged 1000 hours, if it works under the suitable air humidity.

When you spilled water, coffee or beverage on the camera careless, firstly you should turn off the switch immediately. Second, you should wipe the water stain using paper or towel. Thirdly, you need use the rubber ball to blow it carefully. Finally, please test the camera after about 10 hours. (Notice: do not try to test immediately, or the short circuit will damage your camera.)

Shock and Crash

A digital camera is not only a photoelectric device, also a piece of precision equipment. The shake, especially the heavy shake and crash will cause damages for the camera. The damage of any parts of the camera will impact its operation and the imaging quality. Therefore, we should keep it in your hand to prevent it was damaged by accidently, and get it back to the bag when you do not need use it.

Corrosion

We should keep the digital video camera away form the chemical. When you are operating it in some chemical factory area or under the smoke environment, we should use the plastic bag to package it, and then keep it in the ventilated place after finishing the work. As for the cleaning, we just can use the dry and soft cloth, or the moist soft cloth to wipe it. Do not use the alcohol or petroleum ether to wipe it, because they will corrode the cover of the camera.

Smoke and Dust

The digital video camera should work or be kept under the clean environment. The dust, sewage and lampblack will affect its work, because they will impact the definition of the lens and the turning of the knob. Besides, when the high speed movement is occurring between the video head and the tape, the dust fallen on them will damage the video head and tape. When we operate the camera outdoors, we may meet wild wind or sand, which will take heavy damage for the camera. Therefore, when you work in such circumstance, you’re better use the protecting bush to cover it.

Magnetic

The digital video camera is one of the photoelectric integrated precision equipment. The main working principle of digital camera is photoelectric conversion. The key components, such as CCD, DSP chip are sensitive with the strong magnet and electric field, which will affect the normal performance of these advanced functions, and impact the imaging effect, even make the digital camera stop to work. Therefore, we cannot keep the camera close to the magnetic objects, such as motors, transformer, speaker, magnet etc, because it is very sensitive with the magnetic fields. Except those, the radio and TV antenna can also affect the imaging of the camera.

Inertia

Do not keep the camera facing toward the object which is exposure under the strong light, especial the contras light-shade object, like the lamplight in the night. Otherwise, the spot will be left on the photosensitive target of the camera. And it will appear when you use it later, especially when the surface of the object is very dim. It is called the inertia of the camera. In that case, we should stop use the camera to let it take a rest; usually it will recover within one week. The camera cannot continue work a long time. We should make it take a rest per 6 months, and charge it 2 to 3 hours every time.

X-ray

Do not keep the digital camera within the area of radio wave and x-ray, because they will damage the lens and the electronic components.