Procedure to Erase Epson Printer Error Code 0x97

Nov 7
11:42

2019

David Jones US

David Jones US

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Now you can get the best Troubleshooting solutions to resolve Epson printer error 0x97 via Epson printer support phone number +(1)-833-781-7339.

mediaimage

Are you looking for the best solutions to remove Epson printer error code 0x97 then you don’t need to worry. Here,Procedure to Erase Epson Printer Error Code 0x97 Articles we will discuss the complete process to remove the Epson printer error code 0x97. This is a very common error that occurs due to motherboard failure and other interior parts. In this case, you can print any documents and images. Therefore, you need to remove it as soon as possible. This blog will help to solve this problem as soon as possible. If you are unable to solve your problem on your own then don’t worry. The professionals have multiple years of experience in this field so they will solve the entire problems with ease. The Epson printer support team is available around the clock to serve one of the best services. 

Troubleshooting steps to solve Epson printer error 0x97 

If you are suffering from this error and you want to remove this error code then you need to apply the best troubleshooting steps.some of the solutions are mentioned below: 

Solution 1. Try unplugging and plugging-in again

  • Disconnect the entire connected cables.
  • Disconnect USB drivers.
  • Take out the entire printer cartridges.
  • Still switched off, push down the power to discharge the entire remaining power in the printing machine. 
  • Plugin the entire cables and the USB peripherals.
  • Reinstall the printing device ink cartridges.
  • Turn the power back on.
  • Check to see if the error message is solved or not. 

Solution 2. Unplug and Plug-in Advanced method

  • Turn off the Epson Printer and unplug it.
  • Detach the entire cables and USB peripherals.
  • Now, wait for a few minutes until the printer cools down.
  • Push and hold the power key for a minute. Don’t release it.
  • After a minute, connect the power cord and hold for an additional minute.
  • Release the power key. See if the error message still appears. 

Solution 3. Clean clogged Epson printer

Sometimes, Epson users observed that the right fix for this error was merely cleaning the printer’s head nozzles. To do it follow the below-given steps in sequence.

  • Turn off your printer and unplug it from the power supply in addition to your system. 
  • Open the printer casing.
  • Then, take a section of a paper towel, fold it up in order that it could fit below the printing device head.
  • Wet it using any head cleaning fluid which has some ammonia.
  • Position the soaked paper towel down the middle of the track where the printer head moves.
  • Situate the print head to the center so that the ammonia-soaked tissue is under it.
  • Let it sit for 12 hours.

Hopefully, your problem has been solved properly. If you have any queries regarding the Epson printing device then don’t worry. Just pick up your phone and call on Epson printer support phone number +(1)-833-781-7339 and discuss the entire issues with the professionals. They will give you the best ad effective solutions. You can also read this Solutions to Turn HP Printer from Offline to Online