Manufacturer of 2-Furoic acid 88-14-2

Apr 8
14:33

2021

nishant organics

nishant organics

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

SGRL is involved in the manufacturing and development of wide range of high-quality pharmaceutical drug intermediates including 2-Furoic acid CAS No. 88-14-2 and advance intermediates of bulk drugs in its ultra-modern state of art facilities conveniently located at Ankleshwar.

mediaimage
 

CAS No.88-14-2

Chemical Name:2-Furoic acid

SynonymsFuroica;2-Furoic;Furoic aci;a-Furoicacid;2-Furoic acid;2-Furanoic acid;FUROYL CHLORIDE;2-Furoic acid 98%;kyselina2-furoova;AKOS BBS-00003923

CBNumber:CB2189363

Molecular Formula:C5H4O3

Formula Weight:112.08

2-Furoic acid Properties

Melting point:−2 °C(lit.)

Boiling point:173-174 °C(lit.)

Density 1.324 g/mL at 25 °C(lit.)

refractive index n20/D 1.531(lit.)

Flash point:185 °F

storage temp. Store below +30°C.

solubility 37g/l

form Fine Crystalline Powder

pka3.16(at 25)

color Off-white to beige

Water Solubility 36 g/L (20 ºC)

Merck 14,4307

BRN 110149

InChIKeySMNDYUVBFMFKNZ-UHFFFAOYSA-N

CAS DataBase Reference88-14-2(CAS DataBase Reference)

EWG's Food Scores1

FDA UNIIP577F6494A

NIST Chemistry Reference2-Furancarboxylic acid(88-14-2)

EPA Substance Registry System2-Furancarboxylic acid (88-14-2)

2-Furoic acid Chemical Properties,Uses,Production

Chemical Properties

white to light yellow crystal powde

Uses

Substitute for chloropicrin in disinfecting grain elevators.

Definition

ChEBI: A furoic acid having the carboxylic acid group located at position 2.

Hazard

Strong irritant to eyes and skin.

Purification Methods

Crystallise the acid from hot water (charcoal),Manufacturer of 2-Furoic acid 88-14-2 Articles dry it at 120o for 2hours, then recrystallise it from CHCl3, and again dry it at 120o for 2hours. For use as a standard in volumetric analysis, good quality commercial acid should be crystallised from CHCl3 and dried as above or sublimed at 130-140o/50-60mm or less. [Beilstein 18 I 438, 18 II 265, 18 III/IV 3914, 18/6 V 102.]

2-Furoic acid Preparation Products And Raw materials

Raw materials

Uraldehyde Cupric oxide Sodium chlorate hypochlorous acid

Safety Information:

European information :

Most important hazard(s):

Xi - Irritant

R 36/37/38 - Irritating to eyes, respiratory system, and skin.

S 02 - Keep out of the reach of children.

S 24/25 - Avoid contact with skin and eyes.

S 26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S 36 - Wear suitable protective clothing.

Hazards identification

Classification of the substance or mixture

GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)

None found.

GHS Label elements, including precautionary statements

Pictogram

Hazard statement(s)

None found.

Precautionary statement(s)

None found.

Oral/Parenteral Toxicity:

intraperitoneal-mouse LD50 100 mg/kg

Pharmaceutical Research. Vol. 2, Pg. 233, 1985.

Dermal Toxicity:

Not determined

Inhalation Toxicity:

Not determined

Safety in Use Information:

Category: not for fragrance use.

flavoring agents : Recommendation for 2-furoic acid usage levels up to

Applications and occurrences

In industrial use, 2-furoic acid is a preservative, acting as a bactericide and fungicide. It is also considered an acceptable flavoring ingredient and achieved a generally recognized as safe (GRAS) status in 1995 by the Flavor and Extract Manufacturers Association (FEMA). 2-Furoic acid is characterized as a white to off-white crystalline solid and has a distinct odor described in the Encyclopedia of Food and Color Additives as sweet, oily, herbaceous, and earthy.[7] 2-Furoic acid is often used as a starting material for the production of furoate esters. It and its derivatives also aid in the production of nylons, and are often used in biomedical research.

SGRL is involved in the manufacturing and development of wide range of high-quality pharmaceutical drug intermediates including 2-Furoic acid CAS No. 88-14-2 and advance intermediates of bulk drugs in its ultra-modern state of art facilities conveniently located at Ankleshwar industrial area which is 350 km away from Mumbai-India. Our product search for Pharmaceutical Intermediates can help you to find pharmaceutical intermediates with detailed specifications by CAS number and API name.

Toll Manufacturing of 2-Furoic acid CAS No.: 88-14-2

Diphenylacetonitrile CAS 86-29-3