Using Print Head Sealing Tape

Mar 31
20:59

2005

Barry Shultz

Barry Shultz

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

There is a lot of confusion when it comes to using print head sealing tape. When you refill a cartridge that contains a print head, Lexmark and HP in particular, you need to seal the print head to #1 protect it and #2 keep it from drying out. The combination of sealing tape and a cartridge clip can't be beat for sealing cartridges for storage or transport.

mediaimage

Print head sealing tape comes in two varieties,Using Print Head Sealing Tape Articles adhesive and static. Both serve a different purpose which I will get into very shortly. There are two colors available, blue and orange. The orange tape is used on Canon cartridges mostly and is of the adhesive variety. The blue tape is used on HP and Lexmark cartridges and is available in static or adhesive.

The reason the orange tape is only available in adhesive form is because Canon cartridges don't have print heads on them which can be damaged with an adhesive type of tape. The orange tape can be used to seal the ink ports and refilling and breather holes on the BCI-3e and BCI-6 Canon cartridges.

The blue tape deserves more discussion because using the wrong tape can permanently ruin your cartridge. Do not use the adhesive tape on color print heads, ever. It is used to seal the breather holes for storage. The adhesive tape can actually cause the copper foil to disconnect from the cartridge when you remove it, which is of course a bad thing.

Use the static tape on print heads. It has no adhesive and it needs to be applied properly. Many people do not know how to properly apply static print head sealing tape. The trick is to heat up the print head before applying the tape. Get yourself a hair dryer and heat up the print head. Then take a strip of static tape and position it properly and while the print head is warm simply dab your finger on the tape over the print head. The slight pressure will bond the tape to the print head and hold it in place. The heat temporarily expands the tape so when it cools off it will shrink slightly and form a bond around the print head. Add a cartridge clip and you have the best known method for storing cartridges with print heads.

A note of caution here. Some of you will be tempted to use a heat gun. A Heat gun can throw off an amazing amount of heat, probably enough to destroy the print head. If you don't have experience using a heat gun in this fashion please use a hair dryer.

Even if you don't refill a lot you might want to keep a roll of print head tape on hand. Sealing a color cartridge improperly can cause cross chamber migration of ink and that is a contamination that you definitely do not want to deal with.

Also From This Author

Having Fun With The Printer Support Techs

Having Fun With The Printer Support Techs

Many years ago when I was a copier technician my boss would always tell us to push our companies supplies, paper, toner etc.. Of course they wanted to sell more supplies and make more money but their techniques were very questionable. Just like printers you could go out and purchase generic supplies and some worked better than others naturally. Well the supplies that we sold were also mostly generic, however, they were branded with our companies name and logos. Here's where the sneakiness comes in. When a customer complained about a repair cost estimate we were told to blame it on their inferior generic supplies and to further that the repair would have been much cheaper if they were using our over-priced supplies.
My Printer Died - An Epitaph

My Printer Died - An Epitaph

My printer just died. My Epson C60 that I've had for almost 2 years was my buddy. I loved that printer. It was there for me through thick and thin. Sure it had it's quirks and idiosyncrasies like not printing when my office temperature dropped to 17 degrees because I forgot to turn the thermostat up one bitterly cold morning. I had to open the lid and point a ceramic space heater inside to thaw it out.
When Is Black Not Black?

When Is Black Not Black?

Did you notice how many different black inks there are available? At last count we have forty different black inks listed on our web site. You may be wondering how many shades of black can there be? Well there are actually different shades of black which I will explain in a bit.