About Components for Garage Door

Aug 24
08:20

2012

Mohit Jain

Mohit Jain

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Ignoring the malfunctioning of a garage door might result in a major expenditure. Basic garage door maintainence and time to time repair will help the garage door remain in good condition for longer periods of time.

mediaimage
The malfunctioning of any of the moving components of the garage door is the major repair expenditure that a homeowner has to bear. Remember that it is not necessary that all components of the garage door components are same. Many components of the garage door are created intentionally for lower costs and shorter lives and need more frequent maintenance and repair by overhead garage door repair Austin and automatic garage door repair Austin.

You should follow certain guidelines when selecting the various garage door components. Check the warranty period of the moving parts,About Components for Garage Door Articles as they can be different depending on the manufacturers. The majority of the moving parts come with a year's warranty while others can be in the range of three to five years too. You need to know whether the warranty covers the labor expenses but honestly rarely labor is an inclusive part of warranty. It is very important as a user to know what components are liable of failing more often. Rollers are one of the most frequently failing component in case of lower priced doors. In general, most of the manufacturers use bearing-less rollers that come with a nylon or plastic wheel and usually wear out in one and a half years period. However, rollers with bearings do not ensure a longer life what is important is the cycle and weight rating of rollers. The next most commonly failing and expensive component are the springs as most of the manufacturer and service companies make springs for garage doors using wire of lower grades that are rolled cold, which increases the metal weakness potential. Often the wires used for making spring are not coated which results in easy rusting and need to be replaced every 3 to 5 years. You should also inquire about the cycle ratings on springs. It is important that a good two-car door that is more than 10 ft wide must essentially have two springs.

The next important component are the bearings which often fail because usually the doors should have three sets whereas most of the doors come with only two bearing sets plus one plastic bushing. Check the weight ratings of all the moving components, which should be much higher than door weight. Most of the lower level doors come with weight bearing rating either equal to or a little over the weight of the door.

Typically, a two-car door has almost forty moving parts, which do tend to wear out overtime causing them to work inadequately. This can put stress on other parts of the garage door and in turn become unsafe. Deteriorating components are very noisy causing too much wearing of the other components and openers, which can push the door out of its track. Mostly, garage door components are manufactured for an industry assigned minimum of 10,000 cycles of moving up and down. Nevertheless, there are several limitations to this rating system, which can in fact result in less than 10,000 cycles.

Lastly, you should determine if the long-term warranties include parts, labor, and if they have any pro-rating for eventuality as well as servicing by a professional like overhead garage door repair Austin and automatic garage door repair Austin.