All about Cabinet Refinishing

Jan 26
07:36

2012

chaudhary fahim

chaudhary fahim

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

All you need to do is to go through a complete process of cabinet refinishing and painting

mediaimage

All you need to do is to go through a complete process of cabinet refinishing and painting in order to refinish your kitchen and home cabinets in the best possible way. For that reason it will be necessary for you to prepare yourself hard to refinish your kitchen cabinets professionally as well as innovatively. It is imperative for an individual to lift off your door and drawer front. Try to stay away from the cruxes and bolts. Save them in marked box and bolts vanish.

 

Mark every door beneath the hinge and shield the number with a smaller piece of blue adhesive tape. Mark relative box with the same number. Next you have to paint the doors in a closed shape and ventilated room i.e. garage. Shield the floor with two layers of the red construction paper. Make use of the painter plastic to cover the walls and interior design textures. Approximately 1.2 mil-thick can be used to cover the wall in the house. Overhaul all the bolts and holes by using the hard wood filler. Use 220-grit sandpaper to sand the doors and walls. Make use of the rag to vacuum and wipe the doors. Don’t hesitate to repeat the process of coating.

 

Bear in mind to clean the entire work area carefully. Apply the paint along with airless sprayer in order to give a professional finish touch. Don’t forget to switch off all fans,All about Cabinet Refinishing Articles blowers in the room. Paint each wall and door carefully. Use thick layer of the paint and primer in the center of the door. This will help you to stay away from the paint dripping. Keep the doors in horizontal shapes. Always paint the door on the back side and then move forward. If you find lots of wood grans, then don’t hesitate to make use of the two coats on the primer. Don’t put aside the materials and substances in order to paint the door.

 

 

Apply various coating techniques (i.e. Sherwin Williams Satin Proclassic, Benjamin Moore Satin Impervo to paint the doors. Make full use of the protective coating. Repeat the process from the start. Dry each coat of the paint and primer on the door and wall. Use mohair and foam quality roller to paint the cabinet boxes in the kitchen and room. Install the doors carefully. Bear in mind the value of the clean job. Gratitude to your clients, get the check and best of luck!

 

 

If you need any suggestions or comments regarding cabinet refinishing, feel free to contact us online. We refinish your cabinets in the best possible way cost effectively.