How to Install Corner Showers

If you are doing some bathroom remodeling, you might be considering installing one of the corner showers that are available on the market during that time. Although most people tend to shy away from this type of construction, it is actually possible for you to be able to do the work yourself, provided you follow some simple instructions. Not only will you have to actually pick out the shower corner where the shower will be located, you also need to make sure that the plumbing is in place and that all local codes are followed. Here are some specific instructions on how to install corner showers so that you can be happy with the finished work.

The first thing that is necessary is for you to choose the area of the bathroom where the shower is actually going to be installed. Many times, you will be limited as to the area in which this is going to occur, but there may be times whenever you have a number of different options. More than likely, you are going to be utilizing the area where the plumbing is already in existence, especially if you have removed an old shower from its place. It is then simply a matter of installing the new shower and connecting it to the plumbing.

Of course, you are going to need to make sure that all the prep work is done properly in order for the job to go well for you. This would include removing any of the debris is from the shower corner, along with making sure that the subfloor is still intact and able to handle the weight of the shower pan. Remember, it is not just the shower pan that is going to be providing the weight but also any water that happens to be in it at any given time. The last thing that you would want is to have your shower fall through the floor, simply because you did not prepare the area properly.

Once the pan is in place and the drain has been connected properly, you will need to build the walls, and this will typically take place with wall tiles. Make sure that you use the proper type of mastic as the wrong type will deteriorate over the course of time and the tiles may become loose. You should also make sure that all of the plumbing is in place in order for the shower heads to be installed properly, leaving yourself plenty of pipe coming from out of the wall in order to accommodate the additional width of the tile.

When you're installing corner showers, you should always check with the local building codes to make sure that you are in compliance. Most of the time, you will need to pull permits and this may cost a little bit of money, along with costing you some time as well. Having a shower corner such as this can be quite a convenience, just make sure that you plan properly in advance, both for the installation and for any inspections that may have to take place.