Concrete Cutting - Don't Let a Little Bit of Concrete Stop You

Sep 16
17:18

2021

Nancy Whitman

Nancy Whitman

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Concrete cutting is a technique that involves trained technicians sawing, penetrating, and removing concrete utilizing specialized saws with gemstone blades. Unlike the messy "jackhammer" technique, contemporary cement cutting gives a sleek, appealing surface and uses water to avoid sand and dirt.

mediaimage

What is Concrete Cutting? 

Concrete cutting is a technique that involves trained technicians sawing,Concrete Cutting - Don't Let a Little Bit of Concrete Stop You  Articles penetrating, and removing concrete utilizing specialized saws with gemstone blades. Unlike the messy "jackhammer" technique, contemporary cement cutting gives a sleek, appealing surface and uses water to avoid sand and dirt. 

 

Concrete cutting can take various forms, but wall sawing, core drilling, and slab or flat sawing are most frequently used by professionals. Read on to learn more about these cutting techniques, their advantages, and how they apply. 

 

Wall Sawing:

Cutting apertures in cemented walls or masonry, like doors and windows, typically not over 12" deep but up to 24" deep. It is done with the use of a saw that attaches to the wall track.

 

This method employs a massive gemstone blade with a diameter of 30" or even more significant, capable of cutting 12" or more cement from one side to the other. This component of our firm necessitates the most outstanding amount of talent and is not readily accomplished by the typical "DIY" As previously noted, wall sawing can involve carving gaps in brick masonry. Still, it can also reduce base height, complete base demolition, and partial or total removal of concrete retaining structure. 

 

This form of concrete cutting requires a lot of talent and knowledge to cut clean, straight, and even holes with minimal sand and waste; hence it is a pricey procedure. Most concrete-cutting businesses charge an average of $250 to take their instruments to a construction site and saw. When homeowners add foundations or vaults to their homes, they frequently have to saw through their current concrete slab to create an entrance or pathway between the fresh and innovative foundations. 

 

Having this function conducted during the building project rather than later is quicker and, in most situations, more affordable.

 

Core Drilling:

Cutting precise spherical holes through cement walls and floors is known as core drilling. The hole diameters vary from approximately 2 to 1 inches; some household uses require a diameter of 5" to 12" spherical. Core holes in industrial uses can be as large as 60 inches in diameter and a lot extra. 

 

Core holes are widely used for releasing fire and washing machines and "utility penetrations" like electricity, waterworks, and cooling. However, it is not suggested, but experienced "DIY" can do core drilling.

 

Slab sawing:

Slab sawing, often called flat sawing, is a technique for cutting parallel flat concrete surfaces, including floorboards, pavements, and sidewalks. Slab saws have a gemstone blade installed on moving machinery that only needs one person to operate. It can carve to a depth of 33 inches; however, most household uses typically require 6" or less. Forming holes or cuts in concrete floors to reach and replace a damaged water pipe or sewage line is simple with slab sawing. The cement in a foundation or underground modified to build a lavatory is destroyed to install new piping for the fittings.

 

Conclusion 

 

Please don't allow a little concrete to get in the way of your work, whatever it is. Concrete can be a house owner's biggest enemy if they are unaware of organizations whose specialty is to help eliminate them fast and cleanly. Top important information to help you have been discussed in this article.