Automatic Transmission Repair Parts

Transmission repair is a job order that usually occurs when the car is not responsive to the depression of the gas pedal and the shifting of the gears. In automatic vehicles, all that the driver has to do is step on the accelerator and expect the automobile to move forward or backwards. This does not actually seem like a lot of work but it is highly similar to the manual cars that require the driver to change gears when there is a need to go faster or to slow down. It is the computer box that makes the accelerator's demands come true by adjusting the gears according to how deep the driver has stepped on the gas pedal. There are about four to six circular metal plates in this area that are used to control the speed produced by the engine. As the driver increases the pressure on the gas pedal, the vehicle automatically shifts gears to better suit the demand of the person. Due to constant use, the driver can expect to wear down the gears that are present in the gearbox but not after several years of use since these metal plates are sturdy and difficult to wear down I used properly.

Spare Parts
Transmission repair parts include, but are not limited to a torque converter, pump, gearset, bands and the lubricant. The torque converter is a fluid coupling that is attached to the engine in such a way that it functions as a clutch for the gearbox. This can be replaced when it becomes damaged or worn out. The pump can be found in between the torque converter and the gearset. The function of this pump is to gather the necessary lubricant in order to pressurize it in to action to provide the reaction of moving the gears. The gearset is a set of gears that are placed in such a way that one or more may function at the same time to provide the acceleration control that the driver desires. The metal plates with teeth are positioned in such a way that they form a sort of line made up of different gears with different circumferences. These are the ones that are usually replaced when they become worn out. Here are many of these available for the different brands and models of vehicles beings used all over the world. The bands' function is a way that they make other gears hold still while the necessary one is moving. Not all members of the gearset move at the same time, it is possible for only one or two to move so that the rest should be held by the bands in order not to cause confusion in the gearbox. Another transmission repair necessity is the lubricant. This is a highly viscous oil that helps to prevent wear and tear in the moving parts. It functions by coating the gears and other needed parts to make the transition from one gear to another smoother with less friction. This lubricant is different from other motor oils because of its viscosity. If there is not enough of the oil in the gearbox, the possibility of friction means faster wearing down of the metal parts.