CBC Canada Co. now offers gas-tight and zero leakage steam-jacketed blowers for Sulfur Recovery in Cemical Industry.
In high concentrations Hydrogen Sulfide can be lethal. It occurs in natural gas, oil, volcanic emissions, and some mineral springs. In oil refining processes its presence is undesirable, and it must be removed. The Clause process is one of the methods used to remove the hydrogene sulphide, and while doing so, recover elementar sulfur.
In pactice this sulfur removal process requires a gas-tight, zero leakage, high temperature and high pressure blower for intermittent duty that must handle toxic gases and must be capable of being brought on line immediately upon demand. To do this the following features on the blower must be provided:
- Double welded casing construction;- Steam flows between the housing walls to maintain a constant 285 F gas temperature inside the fan (because below 285 F sulfur will change from a gaseous to a solid state and will "freeze" to the blower surfaces causing damage or destruction);- A mechanical shaft seal with heat tracing and purge by air or nitrogen;- To assure tight tolerances between the shaft and shaft seal, the housing should be supported at the centerline, and grows concentric to the fan shaft when exposed to heat.: since this support isolates housing from the drive and mounting bases, housing thermal growth doesn't cause forces to be applied to these bases.- To prevent the shaft from taking a permanent set when the blower is idle but still exposed to the high temperature, a turning gear is provided to keep the blower rotating at a very slow speed of 25 - 40 RPM; alternatively a VFD speed control can be used
Steam jacketed construction can also be used in other thermally critical chemical processes. As to air-tifgt and zero-emission construction, it is used in the following industries:
* Pollution Control* Pulp and Paper Industry* Printing and Converting* Chemical Plants* Power Generation* Research and Development* Petroleum* Food Processing* Paint and Ink Industries
for containment of hazardous organic and inorganic compounds in industrial process plants and other critical applications. Special construction and shaft sealing devices are available for blower service requiring zero or minimal gas leakage into and out of casing.
CBC Canada Co. has a lot of experince with gas-tight and zero-leakage construction on fans and blowers, including: multistage lip shaft seals; Buna-N, Viton and Teflon seals; mechanical shaft seals; special fan housing gasketings; single and double carbon ring seals; hermetically sealed blowers; magnetofluidic and ferrofluidic seals; and packed stuffing boxes with barrier liquids and purgeable seals.
Specific code welding processes and special fan design features are used too - to ensure complete gas tight integrity.
Some special materials and alloys frequently used in gas tight fans, especially for service in hazardous, abrasive, corrosive and high temperature environments, include:
Corten, ASTM A36 Carbon Steel, Hastelloy, Inconel, Stainless Steels of different kinds, Titanium, Monel, Aluminum, Teflon, Rubber LIning. These materials are typical for industrial applications requiring high strength alloys and super alloys too.
Canada Fan Co. is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. CBC Canada Co. also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.
For additional information please refer to http://www.cincinnatifan.net/radialblower.html
Oleg TchetchelVentilation Equipment EngineerCanada Fan Co.
http://www.ventilating.com http://www.fanblower.com http://www.highpressureblower.net http://www.industrialblowerfan.com http://www.industrialfanblower.net http://www.industrialfanblower.com http://www.pressureblower.net http://www.northernindustrialsupplycompany.com http://www.industrialpressureblower.com http://www.tenderall.com http://www.chicagoblowercanada.com http://www.cbblower.com http://www.buffaloblower.com http://www.buffalofan.com http://www.nis-co.com http://www.canadianblower.com http://www.olegsystems.com http://www.canadablower.com http://www.abbblower.com http://www.acmefan.net http://www.industrialblower.net http://www.fansandblowers.net http://www.americanblower.net http://www.barryfan.com http://www.cincinnatifan.net http://www.barryfan.net
Canada Blower AFE ventilator
Canada Blower ATB ventilator is designed for roof mounted exhaust of relatively clean air for applications that require the exhausted air to be moved up and away from the building and where re-entry into the building supply air is possible. The ATB fan features a high efficiency, non-overloading backward inclined centrifugal ventialtor wheel precisely matched to a deep spun venturi.
Centrifugal Pressure Blowers
Positive Displacement Blower are pre-engineered rotary lobe blower packages with relief valve, silencer, unitary base and inlet filter.
Air Curtains for Large Buildings Doors
Off-the-shelf Canada Blower ventilator models are available from a number of suppliers and units are also custom made but, where wide entrances are involved that exceed the capacity of one fan unit, tow or more are stacked side by side (or on top of one another in the case of side mounting of very tall openings) and operated simultaneously, meaning that there is probably no limit to the size of the opening that can be accommodated.
