How to Install Both Floating and Glue down Type of Cork Floors

Cork floor can either be installed in a concrete floor or a sub-surface. There are several steps on how to install cork floor on concrete subsurface. First, you will need to make sure that the surface you are using is very clean, dry and also flat. If possible is recommended you use a moisture content text. You can also cover the surface by use of either cork underlayment or cork polyurethane foam which can actually be used to act as moisture barrier, as a cushion and also a sound barrier. You should as well cut on the bottom door frames enough and this is to allow the planking to be able fit well underneath.

Preparation to male when installing cork flooring

On the other hand, when you are paling on how to install cork floor on sub surface, there are also some preparations which you need to make a bit earlier. Make sure the surface where you are to install the cork floor is clean dry and as well flat and firmly secured.

When you are installing cork floors, you should always understand that they are always mounted on the sub surface using some flooring adhesives. Cork floors can as well be installed directly over a certain secure wood type of sub flooring or onto some certain concrete slabs.

Installing cork floors on concrete

When you want to install your cork floor on Concrete, there are some certain preparations which you also make sure you put into consideration. Get to first check on the concrete sub floor you are to use for moisture content. Get to patch on any hole or crack depending on different manufacturer’s recommendation. Cut also the door frame bottom and this is so allow the cork tiles to fit well underneath. Make sure the concrete surface is clean and smooth and this is to make sure that the cork floors fits on well.

Since the cork tiles have also different natural variations in patterns and shades, you can always sort through various boxes. This will help you select those ties which will provide you with the look you desire. With a spacer also, you can leave an expansion space when installing the cork floors around any fixed object or around the room border. You will also need to apply equal amount of pressure across surface of each tiles when laying them in place. After the cork floor are on their place, and after applying sealer you can then roll the entire floor as per manufactures recommendations. After the installing makes sure the floor dries completely before you step on it. Then, clean finished cork floor using polyurethane and seal it with urethane sealer as per manufactures recommendation.