Wall Removal Sydney – Things to Consider

Sep 16
17:18

2021

Maria A Williams

Maria A Williams

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Knocking down a wall in your home might seem like a fun and exciting project to take on. But don't get hammer happy just yet. Removing a wall is a delicate process that must be initiated after proper planning and consideration.

mediaimage

Improper removal of a wall could cause the roof or ceiling to collapse or lead to issues including problems with gas and ventilation,Wall Removal Sydney – Things to Consider Articles electricity, plumbing, etc.

It is highly recommended that you be sure why you want to remove a wall. Following are some things you should consider before proceeding:

Structural Integrity

If you don't want to see your home in shambles, then the first thing you should figure out is whether or not you are dealing with a load-bearing wall. While a non-loadbearing wall is simply a frame of drywall created to divide a space, a load-bearing wall is created to hold up the roof or floor above it, and it cannot be removed or knocked down without an alternative support system. Therefore, it is highly recommended that you hire the help of local wall removal Sydney to assess your home's framework and suggest a proper course of action.

If you cannot remove the entire wall, then it is recommended that you create an interior window as an alternative. This will allow for better air circulation and let in more light while also doubling as a storage unit or breakfast bar.

Building Permits

Never cut corners with your building or remodelling project, as it will only cost you in the long run. Instead, it is recommended that you consult with your state's regulations on home remodelling and acquire a building permit for any planned structural changes. Failure to get a permit can lead to costly delays, removal of work already completed, or legal action.

Check for Electricity and Plumbing

Of course, home interiors are composed of multiple parts and pieces. These make the wall removal process tricky, mainly if the wall contains HVAC vents, electrical outlets, or plumbing. A simple way to check whether your wall contains ventilation, plumbing, or wiring is to visit your home's basement and check where each of these enters the floor above.

If you find that the wall you plan to remove has any of these parts, proceed with caution. First, shut off the main power of your home before moving forward with the removal. Also, keep in mind that walls with plumbing or power lines hidden behind them should not be knocked down with a sledgehammer. Instead, a saw should be used to cut down the drywall to reveal the wires or pipes underneath.

Plan and Prepare

No matter the type of project, planning is half the battle. Wall removal is not an easy task, and it certainly won't be completed in an afternoon. So, be sure to give it the attention and time it deserves. If you are planning on renovating your floors, then it would be a good idea to combine these two projects and complete the wall removal at the same time.

Categories: