HYC can provide a series of MEMS optical switches in 1×N configuration, such as 1x2, 1x4, 1x8, 1x16, 1x32, 1x48, etc. Customization is available. Find out more about MEMS optical switches on the HYC blog.
With the rapid development of optical fiber, the traditional communication devices with electricity as the core is hardly to meet the needs of high-speed and large-capacity optical communication network. MEMS optical switch has become one of the important devices in all optical communication network due to its small size, easy integration and large capacity.
MEMS optical switch is based on Micro-Electro-Mechanical System(MEMS) technology, using the micromirrors to control and switch the optical path. Its function is shown in the following figure:
MEMS is a micro-device or system which can be produced in batches by interating micro-machinery, micro-actuators, signal processing and control circuits. The principle of MEMS optical switches is very simple. When optical exchange is performed, the angle of the MEMS micro-mirror is moved or changed by the driving of electrostatic force or magnetic power, and the input light is switched to different output ends of the optical switch to realize the switching and on-off of the optical path. Its schematic diagram is shown in the following figure:
Compared with traditional mechanical optical switches, MEMS optical switches have the following advantages:
1.Small size and large exchange capacity
2.MEMS chip can be mass produced, so the single cost is not high
MEMS Optical Switch is an ideal component for OXC MCS, system monitoring and protection, optical fiber sensing, and equipment reuse protection.
Now, HYC can provide a series of MEMS optical switches in 1×N configuration, such as 1x2, 1x4, 1x8, 1x16, 1x32, 1x48, etc. Customization is available. The general indicators are as follows:
What is an OTDR and its basic working principle?
OTDR is an Optical Time-domain Reflectometer. It is the main devices in optical fiber measurement. It uses to test detect problems that may exist in fiber links.
What is C band and L band in WDM (Wavelength Division Multiplexing)?
According to the ITU-T standards, singlemode fiber with the band over 1260nm is divided into O/E/S/C/L/U six bands.What's the wavelength of these bands?
What are insertion loss and return loss?
In fiber optic communications, insertion loss and return loss are two important indicators. What are insertion loss and return loss? What causes the IL/RL? HYC can provide customized high-quality optical fiber connectors, optical fiber jumpers and other optical connection products according to customer needs.
