How to Vanish HP Printer Error Code 0xc05d1281?

Nov 28


Alina Vision

Alina Vision

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Contact anytime HP printer support phone number +(1)-888-846-5560 and get the best steps to fix HP printer error 0xc05d1281.


There are many printers are available to print out important documents. But the HP printer is preferred by many people. This printing device is known for the best printing services. If you want to know how to vanish HP printer error code 0xc05d1281,How to Vanish HP Printer Error Code 0xc05d1281? Articles then you don’t need to go anywhere. This is a common error that occurs due to many reasons. But due to this error, you can’t print your documents. Therefore, you need to remove it as soon as possible. To get eliminate this error, you can apply the given solutions that are mentioned in this article. Apart from it, you can also take the help of experts to solve this problem. They will give you one of the best solutions as soon as possible. The professionals will provide you the effective solutions that will help to remove this issue as soon as possible. To communicate with the experts, you can call on HP printer support phone number +(1)-888-846-5560.

Ways to fix HP printer error 0xc05d1281

To fix this type of error, you need to apply the best troubleshooting steps. Some of the best solutions are mentioned here:

Solution 1.

  • Click and hold the “*” button and then press “#” and release both buttons, Display should say “ Enter special key combo.”
  • Click and leave in sequence the “1”, “2” and “3” key, the display should say something like “ support” R0631M.
  • Click and leave the right arrow key until the display says “ system configuration menu.”
  • Click and release the OK button display should say “ Hardware failure status.” If not there already, arrow key over to “ Hardware failure status.”
  • Now press and release the OK button. 
  • The display should say “ Hardware failure status”. Hit Ok to clear.”
  • Click and leave the OK key. Message changes to “ Hardware failure status Cleared. Click cancel to continue. 
  • Click and leave “ cancel” key as many times as necessary, so that, either the “ Welcome to Photosmart Express” screen appears, or the “ Ink system failure” screen pops up. Not print at this stage. 
  • By using the power key, switch the unit off and unplug the power cable from behind the printer and wall.
  • Now, wait for a few minutes at least 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, then into the printing machine. 
  • Switch the unit on. The printing machine may show the message “ use the power key to shut down the printing machine “ followed by “ click OK to continue.” Hit OK.
  • The printing machine will start the “One-time ink initialization process.” Allow this process to complete and don’t interrupt.
  • In the last click setup menu on the all-in-one then scroll the mouse and choose print report then choose the self-test report.

Solution 2. 

  • Unplug the power from back on the printing machine.
  • Now wait for a few seconds and then hold the “ print photo” and “ cancel” at the same time. You should be able to see it with a blank screen for a few seconds.
  • Now, it’s done and then tries again and again if it does not work.

Solution 3.

  • Unplug the all-in-one from power and wait for 30 seconds.
  • Plugin power only. Now repeat the same steps 2 to 4 more times.
  • After plugging the unit into power you need to check the functionality.

To remove this error, the given solutions are the best. But if the error still then don’t take tension. Just relax, and contact the talented technicians of the HP printer tech support team to get the best solutions.