Ensure top rc helicopter engine maintenance

Jan 6
09:35

2012

Kim Hyo Yeon

Kim Hyo Yeon

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Ensure top rc helicopter functionality! Find out what is up with the engine and do not forget to look after details.

mediaimage

There are many ways to look after your rc helicopter. Many experts recommend to make changes in the carburetor as in the spark plug hole to collect the liquid waste can be dragged down into the cylinder. Get to know how to work on your model flaws.

Sometimes it happened to you that a twang is released alone? This is very common,Ensure top rc helicopter engine maintenance Articles especially when the engine begins making moves and “eats" the engine's crown:

Attacking engine

When an engine is not well targeted the rc helicopter motor gear and the crown makes it malfunction and to wear the crown. That does not happen to put a piece of folded paper between the engine and hb crown, after putting the paper the engine squeeze against the Crown, but without breaking the paper, then put the set screws and bolts tight, remove the paper and see the result.

If we see that is noisy and hard to move (move it and tried it in reverse) is that we have done wrong. If moving with ease without making much noise and seeing that mesh well is that we have done the right way.

For general cleaning I always recommend that you go for:

ü  Degreasers.

ü  Also 3 in 1 plastic grease can clean the engine out.

ü  Patience

Tips

After shooting remove the spark plug and clean, as trash is often hit and damage (especially the oil that makes the filament burn). Avoid alcohol and also the plastic not made too much of degreasers, eventually deteriorate the plastic.

If you see that rc helicopter does not stop being tight linkage is possible that the brake system (caliper, disc, etc.) this is dirty, but it is normal to have oil and other dirt. To do this with alcohol and a "mini-brush" clean it up, moving the drive while the brush is passed.

Control and determine when your heli needs some supplementing some things to go your team, such as:

Ø  Thermometer, there are also some that are fixed install in the car with a tube in the butt, depending on your budget.

Ø  Batteries for the receiver and transmitter also the charger (complete package with everything)

Ø  Igniter of the "good" because the basics are downloaded very fast.

Fail-Safe, is insurance that can be installed on the rc helicopter servo brake / gas and helps slow the heli just in case of interference or lack of batteries.