The Straightforward Procedure That Helps You To Get Your Bike Chain Back On While Riding

The Timing Was Absolutely Not Good For This

You knew it was approaching but it always takes you without warning when you ultimately arrive and glance up. All your ideas become reality as your reach the start of this huge climb. Cycling up to the base of the hill permitted you to use your large gear ring but now you'll rapidly need to shift down to your small chain ring because of this massive climb. Transferring into your climbing gear, your legs start to rotate extremely fast however for some reason you are also coming to a total stop. Looking downwards you realize the reason why you are rotating so fast; your chain has become dislodged and now you have to attempt to get it back on. Let’s quickly learn how to get your bike chain back on without the need of having to stop.

You Don't Have To Go Through This

You wonder if there might have been something that you did that caused this chain off scenario. You remember the last time your chain came off; you managed to get grease coated hands and fingers which in turn got all over your handle bar tape. You recall that whatever you touched became a serious mess. Let the training get started.

Time To Get Your Chain Back On

Should you assess the reasons for bicycle chains falling off, you'd probably discover that the primary reason would commonly be changing gears much too rapidly. A large jump between gears when either switching out of your big chain ring to your small chain ring places you in a high risk chain off situation. Or there are the scenarios where no matter how careful you feel you are, your chain still jumps off.

Let's Put the Front Derailleur to Work

If you understand the best way to repair bikes, you'll also understand that your front derailleur may be used to get your chain back onto your front chain ring where it ought to be without the need of having to stop and jump off your bicycle. Let’s understand how.

The purpose of the front derailleur is almost always to shift the chain backwards and forwards between each of your chain rings (various bikes have 3 while others only have Two). Here are the 2 possible examples of having the chain come off.

The 2 Conditions

1 - Inward fall off

2 - Your bicycle chain jumps away to the outside of one's chain rings

We can easily rectify these 2 scenarios and get back cycling again without the need of having to stop your bicycle. The straightforward technique to use when you have a chain come off to the inside, towards your frame, would be to activate your front derailleur and move it outwards (i.e. as if you were changing to your large chain ring). What this does is to actually use the derailleur cage to push your bike chain into the location that it was before it dropped off.

If you notice that the bike chain has been dislodged on the outside, just advance your derailleur cage towards the little chain ring. This is fundamentally the exact same maneuver as the prior one, but now it uses the derailleur cage to force the chain back onto the big chain ring. The end result of these actions is a chain which has been re-adjusted back in to the location that it was in originally before it fell away.

In case you keep losing your chain on a regular basis, then it might not hurt to check it out to ensure that it's not all worn out.

Don't Get All Greasy

If you recognize the right way to fix bicycles, then you are also most likely familiar with getting your hands quite greasy. Repairing your bike repairs in your shop eventually ends up with grease on your skin which is alright, but what isn't acceptable is getting grease over you while you are away riding. What these types of techniques just reviewed do are to help you get your chain back onto your bicycle and never having to stop and without the need of being required to get grease on your hands.