The central content in this article is show you how to change a silicone watch battery, when your silicone wristwatch battery is die.
When a silicone watch battery dies, you should change it!
If you don't have a case back opener, you can use an eyeglass screwdriver as long as it is flat-head.
Now do like this:
STEP one.Place the jelly watch in the watch vise with the back facing you. Secure the vise to hold the silicone watch in place while you work. If you don't have a watch vise, you need to securely hold the silicone watch in your hand.
STEP two.Insert the case back opener into the slot on the back of the silicone watch. The case back opener is a flat-edge utility tool which pries the back open without scratching the piece.
STEP three.Pry the back off with the case back opener and place the back on the side.Look at the battery to see which side is facing the face and which is facing the back. You will need to remember this when you replace the battery.
STEP four.Remove the old battery, being careful to not touch or alter any of the mechanisms in the silicone watch.
STEP five.Place the new battery in the silicone band watch so it faces in the same way as the old one did.
STEP six.Snap the silicone wristwatch back in place over the battery by firmly pressing down with your thumbs.
PS:Check all warranty information you may have before changing the battery yourself. It's possible that you may be voiding the warranty when you open the back and replace the battery.
Resource File: DEX blog
